The process of installing and activating your ETC device is not complicated, you just need to follow the steps below:
1.Installation equipment: Install the ETC equipment in the middle area of the top of the inner wall of the front windshield of the car. Please note that the installation position should be chosen so as not to affect the driving vision and the visual effect of the windshield.
2.Turn on Bluetooth and the Shanghai Transportation Card app: On your phone** and install the Shanghai Transportation Card app, then turn on the Bluetooth function of your phone.
3.Activate ETC: On the ETC device, plug and unplug the ETC card twice in a row until the screen of the electronic tag shows "Bluetooth is on". Then, confirm the start of activation on your phone. The mobile phone starts to search for the ETC device automatically, and after about ten seconds, if the blue light on the device flashes, it means that the Bluetooth is successfully started, and the activation is successful.
Once the ETC device is installed and activated, the device cannot be disassembled at will. For usual use, you can cut a waste card and paste it on the back side of the ETC machine to press the small switch to keep the device in an activated state, or use a small piece of nano tape to stick it on the front of the ETC, and then stick it on the back of the central control screen, which is very firm, so as to ensure that the device will not be easily stolen.