Summary: When you encounter these beds, run, take a taxi and run!
Recently, Far Beyond Wisdom (CBD Home) shared some things that should be paid attention to when choosing a soft bed, helping everyone avoid the big pits of soft beds and choose a good bed that satisfies them
01 Stability demining.
If you don't choose the whole bed board, it is not breathable and easy to mold, so it is recommended to choose a rib frame, which has good air permeability and prevents the mattress from getting wet.
When choosing a slatted frame, consider its width, thickness and size, as if there are many slats, whether it is a silent bed board, etc., which is extremely important for the subsequent use experience.
The gap between the slats frame should be less than 5cm and smaller than the spring diameter to support the spring and protect the mattress.
Moreover, the stilt rack is usually disassembled and box-packed, which is convenient to install, and the freight is relatively small, so you don't have to worry too much about the space during transportation.
In addition, the toughness of the solid wood chop frame is good, and it will not bend due to uneven force, as long as you make sure that the feet of each slats touch the ground, there will be no uneven force. Like the steel and wood rib skeleton is stressed on the steel frame, once the force is unevenly bent, it can only be flattened in the opposite direction.
02 bed bag material demining.
It is very important to choose the right material for the upholstered headboard, which is not only a matter of beauty or not, but also has a great impact on our health and safety.
Beware of businesses counterfeiting under the guise of solid wood beds and the first layer of cowhide, the formaldehyde content is still exceeded, and the biggest reason is often the MDF in the head of the upholstered bed.
When buying, be sure to confirm with the merchant that it is solid wood, not MDF. When you go to a physical store, you can knock it with your hand, and the crisp sound is generally solid wood, and the stuffy one may be MDF;If the upholstery can be opened, be sure to open it to see the wood.
03 Bed frame material demining.
Speaking of solid wood slats steel wood slats The whole bed board, here is the selection of wood materials, it is generally recommended to choose spruce wood, oak, ash, cherry, walnut, etc., strong and durable, long service life, try to avoid pine, eucalyptus, rubber wood, this is generally not durable formaldehyde content is also high.
04 high-width demining.
Generally, the width of the bed beam is at least 45 cm or more, and equipped with support legs will be more stable. Less than 4Don't consider the 5cm one, and the lack of support legs is also a big problem, which is not conducive to the stability of the bed.
It is recommended to choose a high bed, which is easy to clean, and the height at which the sweeping robot can enter and exit freely;Or choose a box bed without a bottom plate, which can be easily cleaned and placed in the storage box, adding an extra storage space. (Of course, box beds are susceptible to weather and should be taken care of in a timely manner, and on the whole, frame beds are more recommended.) ）
05 Iron frame bed demining.
The wrought iron bed seems to be classical and elegant, but in fact, there are some problems in use, such as: the "metallic" accompaniment when turning over, the trouble of heavy installation, and the lack of stability of the wire woven bed board. On top of that, wrought iron beds are prone to rust and require frequent maintenance and careful cleaning.