The potentiometer used in the wire displacement sensor is imported precision type
The power supply voltage of the cable displacement sensor is +5V, if the power supply voltage is too low or too high, it will also cause the transmission of the signal line, the input voltage should be checked, the input voltage should be adjusted, and the signal line should be checked. The displacement sensor is mounted on an aluminum alloy housing by three screws, and if the threads are loose, it will also cause the position signal to be out of tolerance. Do not use serial lines in the same cable slot as strong voltage or power cables, and use special cables with shielded wires for transmission to avoid signal interference. In order to make the service life of the cable displacement sensor long, it is necessary to do a good job of product protection and keep the wire rope as clean as possible.
The potentiometer used in the wire displacement sensor is imported precision type
The output of the voltage signal cable displacement sensor can be selected two-wire system and three-wire system, the steel wire rope used is imported high-flexibility plastic-coated steel wire rope, the potentiometer used is imported precision potentiometer, and the current output of signal output 0-5k, 0 10k, 0 5v, 0 10v, 4 20mA and other currents can be selected, and a variety of signal outputs are optional, with a maximum reciprocating speed of 1000mm s and a linear accuracy of 01%, zero point adjustable and other advantages, the shell of the 0 5V rope pull displacement sensor is customized by imported aluminum alloy processing, anti-impact, anti-compression, anti-corrosion, especially suitable for working under harsh environmental conditions, with high temperature resistance, anti-interference, anti-static and other functions.
The potentiometer used in the wire displacement sensor is imported precision type
The pull-wire displacement sensor potentiometer is actually a sliding resistor, the standard of the resistor is the key to directly affect the accuracy of the product, the resistance value is crucial, and the resistance value needs to be measured with a multimeter to meet the requirements of the product. Displacement sensor is a key component in the measurement and control of displacement, at present, the demand for incremental wire actuator in the field of displacement control measurement accounts for more than 30% of the encoder market, incremental wire actuator is a new type of measuring element that uses mechanical structure to convert electrical signals to output accurate measurement and control.
The potentiometer used in the wire displacement sensor is imported precision type
The potentiometer used in the wire displacement sensor is imported precision type