Six advantages make anti-static flooring so popular PVC flooring (commonly known as anti-static (a kind of anti-static (a kind of static charge) (anti-static flooring) has been popular in South Korea, Japan and other East and Southeast Asian advanced (advanced) China. With the popularization of heating technology (referring to the ubiquitous and pervasive general), PVC flooring has gradually become popular in China. Today, South Korea, Japan, Hong Kong and Taiwan, and Chinese mainland's tomorrow, follow the pace of the times.
1. Waterproof and anti-slip: the surface (appearance) is a high-density (unit: g cm3 or kg m3) special (special) structure (*simulation) wood pattern, the more astringent and non-slippery it is when exposed to water, and the family pavement can relieve (explain: solve and eliminate) the safety concerns of the elderly and children. Anti-static flooring** is the stage of building renovation. After the indoor ceiling board is laid, and the lamps and vents of the ceiling are also installed, the ground should be cleaned and the raised floor should be paved (if there is insulation cotton and trunking, the insulation cotton and trunking should be paved first). The characteristics of anti-static flooring are incomparable to those of stone and tile.
2. Super wear resistance: The wear resistance of the ground material depends on the material and thickness of the wear-resistant layer on the surface, not just the total thickness of the floor tiles. PVC flooring (floor) surface covering 01-0.5mm thickness polymer special material, high wear resistance, anti-static flooring for similar products to use (lifetime) for the long life. Compare a thin transparent film on a laminate floor or a glaze on a tile to make it even better.
3. Light weight: weight after construction. It is 10 times lighter than the weight of the wooden floor (floor) after construction, 20 times lighter than the weight of ceramic tiles (English: ceramic tiles) after construction, and 25 times lighter than the weight of stone construction to reduce the bearing weight of its building, safety (security) is ensured, and it is convenient to handle 4, and the construction (construction) is convenient (no cement sand, no need to build wood and soil, special mortar paving, fast and easy. Anti-static flooring** is made of highly wear-resistant melamine HPL fireproof board or PVC as the surface layer (due to the dry climate in the northern region, it is not easy to use HPL fireproof board veneer), steel shell structure substrate, and according to whether there is black adhesive strip, there are borderless and edged. There are a variety of products, including a variety of series such as stone, gravel, marble and wood grain, free blending, time-saving and labor-saving, OK at one time.
5. Good toughness: special elastic structure, impact resistance, and suitable foot feel, providing a high guarantee for daily life for the family. Ceramic anti-static flooring can be divided into two categories according to the size of the system resistance: the electrostatic conductive type is less than 10 10 to the 8th power, electrostatic dissipative type is 10 10 to the 6th power 10 to the power of 10.
6. Good thermal conductivity and warmth: heat conduction only takes a few minutes, heat dissipation (cooling) is uniform, there is no cold feeling of stone and tile, and you are not afraid of bare feet in winter.