Recently, there have been many people who have given feedback and want to know more about the selection requirements of silicone rubber cables, and the following is a relevant introduction to it for your reference.
Silicone rubber cable is a kind of high-temperature fire-resistant cable, which is widely used in high-temperature environments and places with high fire risk. Its selection requirements mainly include the following aspects:
1. High temperature fire resistance: Silicone rubber cable must have high temperature resistance and fire resistance, be able to work normally in a high temperature environment, and maintain electrical performance in case of fire to ensure the continuity and safety of power transmission.
2.Chemical corrosion resistance: Silicone rubber cables must have good chemical corrosion resistance, resist the corrosion of acids, alkalis and other chemicals, and ensure normal operation and long life in harsh environments.
3.Mechanical strength and wear resistance: Silicone rubber cable should have high mechanical strength and wear resistance, and can withstand external force extrusion, tension and friction to ensure the integrity and stability of the cable.
4.Insulation and conductivity: Silicone rubber cables should have good insulation and conductivity properties to ensure the efficiency and safety of power transmission.
5.Flame retardant performance: Silicone rubber cable should have good flame retardant performance, which can quickly stop burning when a fire occurs, reducing the spread and damage of fire.
In power transmission, the installation and maintenance of silicone rubber cables require special attention to the following points:
1. Installation: When installing silicone rubber cables, it is necessary to ensure that the bending radius of the cable is not less than the specified value to avoid excessive bending that causes damage to the cable and deterioration of performance. At the same time, it is also necessary to ensure that the cable is well grounded with other equipment or metal structures to ensure the safe use of the cable.
2.Maintenance: When using silicone rubber cables, it is necessary to regularly check the appearance of the cable for damage, aging, cracks, etc., and replace the problematic cable in time. At the same time, it is also necessary to pay attention to the temperature change of the cable to avoid exceeding the temperature resistance range of the cable, so as not to affect the power transmission and cable life.
3.Cleaning: Clean the silicone rubber cable regularly to avoid the accumulation of dust and debris to maintain good insulation and conductivity. When cleaning, care should be taken to use appropriate cleaning agents to avoid damage to the cable material.
4.Waterproof and moisture-proof: Silicone rubber cables should be avoided from being soaked in water for a long time, especially in outdoor installation, waterproof measures should be strengthened to prevent moisture from penetrating into the inside of the cable, affecting power transmission and cable life.
The selection requirements of silicone rubber cable mainly include high temperature fire resistance, chemical corrosion performance, mechanical strength and wear resistance, insulation and conductivity, flame retardant performance, etc. In the installation and maintenance, it is necessary to pay attention to the reasonable installation, regular maintenance, cleaning, waterproof and moisture-proof measures of the cable to ensure the normal operation and long life of the cable.