The ADUM1201BRZ-RL7 is ADI's digital isolator that combines high-speed CMOS and monolithic transformer technology to provide superior performance characteristics over alternatives such as optocouplers. By avoiding the use of LEDs and photodiodes, IC couplers eliminate the design difficulties typically associated with optocouplers. ADi** Merchant - SMIC will provide you with ADUM1201BRZ-RL7 Chinese information, application fields, pin diagrams and precautions for use.
Brand: ADI Adeno.
Product Category: Digital Isolators.
Encapsulation Case: SOIC8 150mil
Operating temperature: -40 +105
Part Status: Active
Series: icoupler
Installation Type: SMT
Rise Fall Time (Typical): 25ns
Propagation delay TPL tphl (max): 50ns, 50ns
Number of circuit groups (number of channels): 2 channels
Isolation voltage: 25kvrms
Transfer rate: 10MB s
Use type (function): General.
Original Manufacturer: Analog Devices, Inc
Country of origin: America
Length x Width Size: 490 x 3.90mm
Height: 155mm
Component Lifecycle: active
Power supply voltage min: 27v
Supply voltage max: 55v
Pin count: 8pins
The ADUM1201BRZ-RL7 is widely used in Size-Critical multi-channel isolation, SPI interface data converter isolation, RS-232 RS-422 RS-485 transceiver isolation, digital fieldbus isolation, hybrid electric vehicles, battery monitors, and motor drives.
The ADUM1201BRZ-RL7 is a digital isolator that features high accuracy, high speed, and low power consumption. When using the ADUM1201BRZ-RL7, you need to be aware of the following:
1.Pin Connection: When designing the board, make sure that the pins of the ADUM1201BRZ-RL7 are properly connected. In particular, the VDD1 and VDD2 pins need to be properly connected to the power supply and ground wires.
2.Supply Voltage Range: The ADUM1201BRZ-RL7 has a supply voltage range of 3V to 55v。Please make sure that the supply voltage is within this range to ensure that the chip works properly.
3.Temperature Range: The ADUM1201BRZ-RL7 has an operating temperature range of -40°C to +105°C. Please ensure that the chip is working properly within this temperature range and avoid exceeding the temperature limit.
4.PCB Layout: When designing the board, lay out the ADUM1201BRZ-RL7 and other circuit components to ensure signal integrity and electromagnetic compatibility.
5.ESD Protection: To protect the ADUM1201BRZ-RL7 from electrostatic discharge, take appropriate precautions such as using a grounding wrist strap or anti-static pad when handling and handling the chip.
6.Data Communication: The ADUM1201BRZ-RL7 supports digital isolators for data communication. When using it, make sure that the communication parameters are configured correctly, such as baud rate, data bits, check digits, etc.
7.Differential I/O: The ADUM1201BRZ-RL7 features a differential I/O structure and is highly resistant to interference. When using it, pay attention to the connection method of the differential input and output and the signal transmission quality.
If you need selection guidance, sample testing, procurement, BOM matching and other needs**Customer service WeChat: 13310830171.