Syringe Volume Tolerance and Residual Volume Tester Test Procedure PointsEnjoy
A syringe is a medical device used to inject liquid or liquid, and the accuracy of its volume directly affects the amount and efficacy of the patient's medication. Therefore, it is very important to test the tolerance and residual volume of the syringe volume. This article will share the test steps of the syringe volume tolerance and residual volume tester.
1. Preparations.
The following preparations need to be made before performing syringe volume tolerance and residual volume testing:
1.Prepare the test instrument: Syringe capacity tolerance and residual capacity tester, including the main unit, power adapter, test software, etc.
2.Install the test software: Install the test software to your computer and open the test software.
3.Prepare the syringe: Select the syringe that meets the test requirements and clean it.
4.Prepare liquid medicine or liquid: According to the test requirements, prepare an appropriate amount of liquid medicine or liquid.
Second, the test steps.
1.Test environment preparation: Clean up the test environment to ensure that there are no interferences. At the same time, ensure that the temperature and humidity of the test environment meet the test requirements.
2.Connecting the Instrument: Connect the main unit of the syringe volume tolerance and residual volume tester to your computer and plug in the power adapter.
3.Start the test software: Open the test software and select the appropriate test items, such as syringe volume tolerance and residual volume test.
4.Calibrate the instrument: Calibrate the syringe volume tolerance and residual volume tester according to the prompts of the test software. Once the calibration is complete, the test software will show you whether the calibration result is correct.
5.Add syringes: Add the cleaned syringe to the fixture of the test instrument and follow the instructions of the test software.
6.Add liquid or liquid: The prepared liquid or liquid is added to the syringe through the syringe's inhalation device.
7.Start Test: Select the Start Test button on the interface of the test software, and the instrument will automatically perform the test. During the test, the volume tolerance and residual volume data of the syringe are displayed in real time on the interface of the test software.
8.Recording data: After the test is completed, the test software automatically records the volume tolerance and residual volume data of the syringe. Users can export the data to a computer for further processing and analysis.
9.Clean the instrument: When the test is complete, remove the syringe from the fixture and drain the liquid or liquid from the syringe. The syringes and fixtures are then cleaned and sterilized for the next use.