The three-color light of the machine tool refers to a kind of lighting system installed on the machine tool equipment, which can indicate the working status of the machine tool through different colors of lights, and the common colors are red, yellow and green. During the operation of the machine tool, the three-color light can convey the signal by flashing, always on, etc., which is convenient for the operator to understand the current working status of the machine tool and improve work efficiency.
Energy-saving advantages. Traditional machine tool lamps mostly use incandescent or fluorescent lamps, which have high power consumption and relatively short lifespan. The three-color lamp of the machine tool uses LED lamp as the light source, which has the advantages of energy saving, long life and high brightness. The energy consumption of LED lamps is only about one-tenth of that of traditional incandescent lamps, and the service life can reach hundreds of thousands of hours, and there is almost no need for maintenance and replacement, which greatly saves maintenance costs and energy expenses.
Application case sharing.
1.The application of three-color lamp for machine tools in a workshop.
In the production workshop of an auto parts manufacturing factory, a number of CNC machine tools are installed for parts processing. In order to facilitate the monitoring of the working status of the machine tool by the operator and improve the work efficiency, the workshop management department decided to upgrade the three-color light of each machine tool. By replacing conventional incandescent and fluorescent lamps, the indicator light system of the machine tool was retrofitted with LED tri-color lamps. After modification, it can not only clearly indicate the operating status of the machine, but also has a significant energy saving effect. The energy-saving management department of the workshop made statistics on the energy saving and found that the monthly electricity expenditure was reduced by about 10%, and the life of the LED lamp also greatly reduced the maintenance cost.
2.The application of three-color lamp for machine tools in a CNC processing factory.
In order to improve the management efficiency and production efficiency of workshop production, a CNC processing factory has upgraded the machine tools in the whole workshop and modified all the machine tool indicators into three-color lights. Through the use of three-color lights, the operator can clearly understand the current working status of the machine tool, reducing production accidents caused by misoperation. At the same time, the energy-saving advantages of LED lamps have also been fully exerted, which greatly reduces the energy consumption expenditure of the workshop. As a result of the retrofit, the plant's productivity and safety have been significantly improved.
Summary. The energy-saving advantages of the three-color lamp of the machine tool are obvious, and the energy-saving, long life, and high brightness of the LED lamp source can save a lot of energy expenditure and maintenance costs for the factory. Through the sharing of practical application cases, we can see that in the factory production of many industries, the three-color lights of machine tools have achieved good results. Therefore, we believe that in the future factory production, the three-color lamp of the machine tool will be more widely used and become an important tool for energy conservation and environmental protection in the factory.