Zhejiang·
Through the analysis of the practical assessment of our station, the common mistakes of candidates and the precautions for the examination are summarized as follows, so as to provide reference for the candidates participating in the assessment.
1. Judgment of the working state of the fire alarm controller: omission and misjudgment should be avoided.
2. Check the alarm information and determine the alarm position: according to the requirements of the test questions, check the corresponding alarm information to avoid query errors.
3. Fire emergency broadcasting operation: emergency broadcasting should be carried out on the corresponding regional ** in accordance with the requirements of the topic.
4. Judgment and switching of the control mode of the fire alarm controller: judgment and switching are carried out by the automatic indicator light and the corresponding buttons.
5. Determine the working status of the field equipment through the fire alarm controller: fail to enter the correct menu item to view the corresponding equipment information.
6. Electrical control cabinet of automatic sprinkler system: I do not understand the operation points of the main and standby pumps, manual automatic and main and standby power switching.
7. Operation of smoke prevention and exhaust system: After setting the corresponding equipment control state according to the requirements of the topic, find the manual actuator of the air supply outlet or smoke exhaust outlet and carry out subsequent operations.
8. If you don't listen to the exam questions during the assessment process and can't operate correctly according to the requirements of the questions, you should listen to the requirements of the questions clearly and then do it.
9. Candidates think about the test questions for too long and fail to complete the operation or answer the questions within the specified time.
10. Junior candidates do not carefully study the "operation guide" before the examination, do not carefully review the questions during the examination, and do not pay attention to the answering time, resulting in loss Xi of marks and unfinished questions, which will affect the results of the examination.
Beijing
According to the actual situation of practical appraisal, we summarize the links that candidates are prone to make mistakes or ignore in practical appraisal, so as to enhance the pertinence and effectiveness of candidates' learning Xi for candidates' reference.
(1) Examination area of the central control room
1. Check the alarm information and confirm the alarm position. Candidates need to listen to the query content required by the question before operating, when the graphical display device query status information, should find the corresponding text status information in the display area, and the corresponding alarm information can be queried after opening.
2. Fire emergency broadcast operation. Candidates need to listen to the operation methods required by the question, and the emergency broadcast should be turned on first in the ** evacuation instruction audio file and emergency matters, and the operation must be completed in accordance with the correct operating procedures.
3. The fire alarm controller manually and automatically switches the state. Some candidates are not familiar with the wall-mounted alarm controller and do not know how to operate it. The current control mode needs to be judged in the display screen, and the control switch page can be entered in the user settings options.
(2) Examination area for smoke prevention and exhaust system
1. Judgment of the working status of the smoke prevention and exhaust system. Candidates can identify the appearance characteristics of the components, installation location and other information, correctly distinguish between smoke prevention and smoke exhaust systems, and then answer according to the requirements.
2. Use the remote control actuator to open the smoke exhaust port. Some candidates can't accurately find the remote control actuator, and mistakenly think that it is using the controller bus disk for remote control, which can be understood as the actuator that manually controls the opening and closing of the smoke exhaust outlet of the panel.
(3) Water system examination area
Sprinkler system electrical control cabinet operation. Candidates are not familiar with the switching of main and backup pumps and the conversion of dual power supplies. In the process of switching between the main and standby pumps, the corresponding control switch should be found, and the current control mode of the transfer switch should be judged first, and then operated according to the requirements of the topic.
(4) Other issues
Some candidates are too nervous during the examination process and cannot grasp the key points without listening to the exam questions clearly. Some candidates take too long to think and cannot complete the operation within the specified time. The appraisal examination room is a platform for the majority of candidates to show their professional ability, please adjust your state during the examination, relax your mind, and show your best self.
Henan ·
All candidates should pay full attention to and prepare for the exam carefully, and should not be limited to operating a single brand of facilities and equipment, but should pay attention to learning and mastering the basic principles Xi of fire protection facilities and equipment operation and monitoring operations, testing and maintenance methods, and put an end to rote memorization. If conditions permit, different categories, brands and models of fire-fighting facilities and equipment can be used to familiarize themselves with and consolidate the operation mode, especially to pay attention to the strengthening of key skills and avoid losing points in key skills as much as possible.
Our station has released a real-life introduction to the examination environment, so that candidates can familiarize themselves with the facilities, equipment, and environment of our examination room in advance, and fully prepare for the exam.
Guangdong
Through the analysis of the actual situation in the practical assessment, we summarize the common mistakes of candidates and the precautions for the examination as follows for candidates' reference.
1. Water fire extinguishing system examination area
Finding the terminal water test device: If the candidate cannot find the terminal water test device correctly, he or she should familiarize himself with the equipment in the test area during the time before the test, fully understand the installation requirements of the end water test device or use the pipeline to find the corresponding equipment.
Operation of the fire pump of the terminal water test device: If the candidate fails to start the fire pump of the terminal water test device normally, he should correctly understand that the control cabinet must be in the state of automatic operation before the terminal water test device can be started.
Second, the fire control room examination area.
Judgment of the working status of the fire alarm controller: Candidates need to find the fire alarm controller correctly and judge the corresponding working state for the status of each indicator light.
Alarm information viewing and alarm location determination: Candidates need to listen to the content of the query required by the question and operate the device in all available ways.
Distinguish between bus and multi-line reels incorrectly: Candidates should correctly distinguish between bus reels and multi-reels, and remember to open the permission lock to operate.
3. Fire prevention inspection area
Fire-fighting equipment terminal power distribution device and fire door: Candidates should familiarize themselves with the equipment in the test area within the time before the test, and determine the location of the terminal power distribution device and fire door through their appearance and function.
Judgment of the working status of the smoke prevention and exhaust system: Candidates should distinguish and identify the difference between the smoke prevention system and the smoke exhaust system, and the control cabinet must be adjusted to the corresponding state during operation before subsequent operation.
(4) Other issues
During the assessment, some candidates are too nervous during the examination process and cannot hear and understand the content of the test questions, resulting in wrong answers. It should be reminded that candidates can ask the examiner to repeat the questions within the specified time of the exam questions, but it should be noted that the time for repeating the questions is counted as the time for answering the questions.
Jiangsu
Through the analysis of the actual situation of the practical assessment of our station, the common mistakes of candidates and the precautions for the examination are summarized as follows, so as to provide reference for the candidates participating in the assessment.
1. Judgment of the working status of the fire alarm controller: omission and misjudgment (wrong alarm type) should be avoided.
2. The distinction between the fire linkage controller bus and the multi-wire control panel: the equipment that should be operated on the corresponding control panel according to the requirements of the topic and started according to the requirements.
3. Start the equipment on the bus reel and judge the significance of the indicator light: After starting the equipment on the bus reel, it is necessary to judge the starting state according to the actual signal of on-site feedback.
4. Fire emergency broadcast recording and: emergency broadcast should be broadcast to the corresponding area in accordance with the requirements of the topic.
5. Judgment and switching of fire alarm controller control mode: judgment and switching are carried out by manual, automatic indicator lights and corresponding buttons (especially Tahoan fire alarm controller).
6. Check the working status of field equipment through the fire alarm controller: For the candidates who fail to operate correctly, such as checking the total number of devices connected in a circuit, they should focus on strengthening Xi.
7. Electrical control cabinet of automatic sprinkler system: candidates are not familiar with the equipment and do not understand the operation points of the main and backup pumps and automatic manual switching.
8. The manual actuator of the smoke exhaust system starts the smoke exhaust fan in linkage: the candidates are not familiar with the manual actuator of the smoke exhaust outlet, and most of the remote actuators need to find and operate the manual actuator of the smoke exhaust outlet after setting the control state according to the requirements of the question. In addition, candidates do not have a comprehensive grasp of the composition of mechanical smoke extraction systems.
9. If you do not listen to the test questions during the assessment process, you can not operate correctly according to the requirements of the questions, and you should listen to the requirements of the questions: what operation is carried out on what equipment, and then you can do it.
10. Candidates are not familiar with the examination equipment, think for too long, and fail to complete the operation or answer the questions within the specified time.
Sichuan ·
Through the combing and analysis of the relevant situation since the operation of the intelligent practical operation assessment of our station, the common mistakes of candidates and the precautions for the examination are summarized as follows.
(1) Control room examination room
1. Judgment of the working status of the fire alarm controller: candidates need to wait for the analog signal to appear before making a judgment.
2. Fire linkage controller and multi-wire control panel control state switching: according to the requirements of the topic, you only need to operate the key to switch the control state.
3. Start the equipment on the bus reel and judge the significance of the indicator light: After starting the equipment on the bus reel, it is necessary to judge the starting state according to the actual signal on the site.
4. Fire emergency broadcast recording and: the recording is not successful or the audio file is incomplete after recording.
(2) Water system examination room1. Identify the working status of the dual power supply control cabinet: candidates need to make a judgment on the working status of the dual power supply control cabinet on the spot according to the analog signal.
2. On-site test wet system end water test device: If the end water test device is turned on and the spray pump is not stopped according to the requirements of the question, the candidate needs to stop the spray pump according to the voice prompt and indicator light.
(3) Electrical equipment examination roomOn-site operation of the manual actuator of the smoke exhaust system linkage to start the smoke exhaust fan: the candidate failed to accurately find the manual actuator of the smoke exhaust outlet, and most of the remote actuators need to find and operate the manual actuator of the smoke exhaust outlet after setting the control state according to the requirements of the question.
(4) Other issuesCandidates are not familiar with the test equipment, think for too long and do not pay attention to the assessment time, and do not submit their answers on time.