The evaporator of the fresh milk refrigerated tank adopts the international advanced high and low temperature dual-zone evaporation plate, with low temperature on the bottom surface and high temperature on the side, which can effectively prevent the phenomenon of local freezing and fat separation of milk, thereby improving the refrigeration speed.
The evaporator of the fresh milk refrigerated tank has a high heat exchange capacity, and the temperature difference between the milk and the evaporator is small, especially when the milk volume is less and the milk does not freeze at the end of refrigerationAt the same time, the matching between the evaporator and the compressor and the condenser is also very reasonable, which is conducive to the circulating evaporation of the evaporation medium, and increases the effective area of the evaporator, thereby improving the heat transfer speed and further improving the refrigeration rate.
Secondly, the evaporator of the fresh milk refrigerated tank has excellent pressure resistance and long service life. Due to the special design of the compressor unit, the internal pressure of the evaporator is much less than that of ordinary equipment when it is cleaned with 85 degrees of hot water. The advantage of this design is that it can overcome the problems of internal gas stringing and air leakage caused by open welding of evaporator solder joints, which can seriously affect the refrigeration effect and lead to the shortening of the service life of the evaporator. Therefore, the evaporator of the fresh milk refrigerated tank can not only improve the refrigeration effect, but also extend the service life of the evaporator.