HMCXZ 35KV cable AC withstand voltage test device tested object and test requirements:
The 35kV cable AC withstand voltage test device is a device used to test the withstand voltage performance of 35 thousand volt cables. The subject of the test is a 35kV cable, and the test requirements usually include a withstand voltage test at the specified voltage for a certain period of time to ensure that the cable will not break down or damage the insulation under normal use. Specific testing requirements may vary depending on the standard or specification, and it is recommended that you refer to the relevant standard or specification for detailed information.
The key points for the selection of HMCXZ 35KV cable AC withstand voltage test device may include the following aspects:
1.High Voltage Generator: Choose a generator that can produce a stable and reliable 35kV AC high voltage to ensure that the required voltage can be supplied during the test.
2.Safety protection system: The device should be equipped with a complete safety protection system, including overload protection, short circuit protection, etc., to ensure the safety of personnel and equipment during the test.
3.Control system: It should have a flexible control system, which can accurately control the voltage, current and other parameters in the test process to meet the test needs of different types of 35kV cables.
4.Data logging and analysis capabilities: The device should have data logging and analysis capabilities, be able to record key data during the test process, and provide data analysis functions for subsequent analysis and evaluation of test results.
5.Reliability and stability: The selected products should have high reliability and stability, and can operate stably for a long time to ensure the accuracy and reliability of the test results.
The above are some key points for the selection of 35kV cable AC withstand voltage test device products, I hope it will be helpful to you.
HMCXZ 35KV cable AC withstand voltage test device is a device used to test the withstand voltage capacity of cables under high-voltage AC conditions. When using such a device, the following needs to be noted:
1.Safety first: Operators must have relevant electrical safety knowledge and operation skills, strictly abide by operating procedures, wear protective equipment, and ensure personal safety.
2.Equipment inspection: Before the test, a comprehensive inspection of the test device is required to ensure that the equipment is operating normally, the components are firmly connected, and there is no damage and leakage.
3.Environmental inspection: The test site should be kept dry and ventilated to avoid the impact of water vapor and dust on equipment and cables to ensure that the test environment meets the requirements.
4.Parameter setting: According to the specifications and requirements of the cable, reasonably set the voltage, time and other parameters of the test device to ensure the accuracy and effectiveness of the test.
5.Monitoring and recording: During the test, it is necessary to monitor the voltage, current and other parameters in real time, and record the test data for subsequent analysis and comparison.
6.End of test: After the test is completed, turn off the test device in time, remove the connection, clean up the test site, and keep the equipment and environment clean and safe.
The above are some of the things that need to be paid attention to when using the 35kV cable AC withstand voltage test device. It is important to strictly follow the relevant regulations during operation to ensure the safety and accuracy of the test.