Pulse dust collector bag cleaning method

Pulse dust collector bag cleaning method

Pulse dust collector is an efficient and reliable dust collection equipment, which is widely used in various industrial fields. However, with the increase of time of use, the cloth bag of the pulse dust collector will gradually accumulate dust, affecting its dust removal effect. Therefore, it is very necessary to clean the cloth bag of the pulse dust collector regularly.

The following are the basic steps for pulse collector bag cleaning:

1. Preparations.

1.Turn off the power to the pulse collector to ensure that the equipment is shut down.

2.Have cleaning tools ready, such as soft brushes, compressed air**, vacuum cleaners, etc.

3.Wear protective equipment, such as gloves and masks, to prevent dust from harming the respiratory system.

Second, the cloth bag is disassembled.

1.Open the top cover or side door of the pulse collector to reveal the area where the bag is located.

2.Disassemble the bags one by one, taking care not to damage the internal structure of the bags and the dust collector.

3.Place the disassembled cloth bag in a clean place for subsequent cleaning.

3. Bag cleaning.

1.Use a soft brush to gently brush away dust and impurities from the surface of the bag. Be careful not to damage the cloth bag.

2.Use a vacuum cleaner to suck up dust and impurities from the inside of the bag. Be careful not to use too much suction power of the vacuum cleaner to avoid damaging the cloth bag.

3.If there is oil or stains on the surface of the bag, it can be cleaned with an appropriate detergent. After washing, rinse with clean water and let dry.

Fourth, cloth bag installation.

1.Reinstall the cleaned bag into the pulse collector. Pay attention to the correctness of the installation position and orientation.

2.Close the top cover or side door of the pulse collector and make sure the bag is securely installed.

3.Start the pulse dust collector and check if it is working properly. If an abnormal situation is found, it should be stopped for inspection and treatment in time.

5. Precautions.

1.During the cleaning process, attention should be paid to safety to avoid the flying and inhalation of dust and impurities.

2.The cleaned bag should be properly stored to avoid re-contamination.

3.Regularly cleaning the bag of the pulse dust collector can prolong its service life, improve the dust removal effect, and ensure the normal operation of production equipment.