Tricks to eliminate bubbles in mobile phone film, how to tear off the original film of mobile phone
Have you ever bothered about bubbles on your phone's film?Or you want to replace the mobile phone film but don't know how to remove the original film?Today, I'm going to share some practical tips for you to solve these problems easily.
1. Tricks to eliminate bubbles in mobile phone film.
Hair dryer heating method.
First, you can use a hair dryer to heat up the bubbles. Be careful not to overheat to avoid damaging your phone screen. When heated, the bubbles will become soft, and then gently press the bubbles with a cloth or scratch card to push them out.
2.Credit card scraping.
If you don't have a hair dryer, you can also use a hard card like a credit or bank card. Point the card at the bubble and with a light scrape, the bubble will disappear. It's easy to do, but pay attention to the force to avoid scratching the screen.
3.Re-lamination method.
If neither of the above methods can solve the problem, it may be due to poor film quality or improper operation. At this point, you can try reapplying. Choose the best film and follow the correct steps to avoid air bubbles.
Second, how to tear off the original film of the mobile phone.
Hair dryer heating method.
In the same way as eliminating air bubbles, we can tear off the original film by heating it with a hair dryer. First, heat one corner of the membrane, then gently lift the corner of the membrane using a cloth or scratch card, and then do the same for the other corners. Be careful not to push too hard to avoid damaging the screen.
2.Alcohol wipe method.
Use medical alcohol or liquor poured over a clean cloth and wipe the phone screen. Wait for the alcohol to dry before peeling off the original film. This method is not only simple and easy, but also avoids the tearing difficulties caused by static electricity.
3.Heat gun heating method.
If you have a heat gun, you can also use it to help tear off the original film. Heat the heat gun by pointing it at one corner of the film, then use a scratch card to gently lift off the corner of the film. This method works well, but be careful not to get too high a temperature so as not to damage the screen.