The U disk is a storage device commonly used in our daily life, but in the process of use, it is inevitable to encounter some unexpected situations, such as water ingress into the U disk. Once the USB flash drive is flooded, it will lead to problems such as short circuit in the circuit and data loss. So, when the USB flash drive is flooded, what should we do?The following is a detailed introduction to the treatment method after the water is ingress into the USB flash drive.
1. Immediately cut off the power.
When the USB flash drive is flooded, the first thing to do is to cut off the power immediately. Because water is electrically conductive, if it is not powered off in time, it will cause a short circuit in the circuit and even burn the USB flash drive. Therefore, when we find that the USB flash drive is flooded, we should immediately unplug the USB flash drive from the computer and cut off the power supply.
2. Dry upside down.
Next, we need to turn the USB flash drive upside down to dry. Because moisture will flow along the circuit board, if it is not removed in time, it will cause a short circuit in the circuit. Therefore, we should place the USB flash drive upside down to allow the moisture to flow out along the board. At the same time, we can also use tools such as hair dryers or electric fans to speed up the evaporation of water. However, it is important to note that do not use hot air to dry, as the overheated temperature will damage the board.
3. Use absorbent paper or desiccant.
In addition to drying upside down, we can also use absorbent paper or desiccant to absorb moisture. Wrap the absorbent paper or desiccant on the USB flash drive, and then wait for a while for the absorbent paper or desiccant to absorb the water in the USB flash drive. However, it is important to note that you should not use absorbent paper or desiccant that is too wet, as this will cause moisture to penetrate into the board.
Fourth, wait for recovery.
Finally, we need to wait for the USB flash drive to recover naturally. Because moisture flows along the board, some moisture may remain in certain parts of the board and take time to evaporate completely. Therefore, we need to wait patiently for a while to allow the USB flash drive to recover naturally. If the USB flash drive can be used normally, the processing is successfulIf the USB flash drive still does not work, it may be damaged and needs to be repaired or replaced.
Related question: Can I continue to use the USB flash drive after it is flooded?Answer: If the USB flash drive is treated and restored in time after water ingress, it can continue to be used. However, if it is not handled properly or too much water is ingress, it may cause the USB flash drive to be damaged and unusable.
How to deal with the water ingress in the USB flash drive?Answer: When the U disk is flooded, the power should be cut off immediately, and then it should be dried upside down or use absorbent paper or desiccant to absorb the water, and finally wait for recovery.
Can I dispose of it by myself after the U disk is flooded?A: You can try to handle it yourself, but you need to pay attention to safety and correctness. If you are unsure of what to do or are worried about damage caused by improper handling, it is advisable to seek professional help.
How to prevent water ingress into the USB flash drive?Answer: In order to avoid water ingress into the USB flash drive, we can pay attention to waterproof measures when using the USB flash drive, such as avoiding placing the USB flash drive in a humid environment, avoiding soaking the USB flash drive in water, etc. In addition, you can also choose USB flash drive products with good waterproof performance for purchase and use.