I. Introduction
The 120-bag stand-alone bag filter is a kind of equipment widely used in industrial dust control, which has the advantages of high dust removal efficiency, stable operation and easy use. However, proper installation and use are essential to get the most out of its performance and extend the life of your equipment. This article will help customers better understand and master the installation and use of the equipment by the installation technical requirements of the 120-bag stand-alone bag dust collector.
2. Installation environment requirements for 120 bags of stand-alone bag dust collector
Installation site: Choosing the right installation site is essential for the normal operation of the 120-bag stand-alone bag filter. A flat, open environment free of strong vibrations and corrosive gases should be chosen, taking into account the space required for equipment hoisting and maintenance.
Foundation production: According to the weight and bearing requirements of the equipment, design and make a suitable foundation to support the equipment. The foundation should be able to absorb the vibration of the equipment and prevent the equipment from dislodging, while taking into account the installation and maintenance requirements of the equipment.
Indoor environment: If the 120-bag stand-alone bag filter is installed indoors, it should be ensured that the indoor environment meets the requirements of equipment operation. The room should be dry and well ventilated, avoid direct sunlight on the surface of the equipment, and take into account the needs of the equipment for heat dissipation and air circulation.
3. Installation steps and technical requirements of 120 bags of stand-alone bag filter
Equipment unpacking inspection: Before installation, the equipment should be unpacked and inspected, check whether the number of equipment and accessories are complete, and check whether the equipment is damaged or defective.
Foundation production and equipment in place: Make the foundation according to the design requirements, and put the dust collector in place on the foundation. Make sure the dust collector is securely installed to prevent vibration or displacement of the equipment during operation.
Flue gas duct installation: connect the flue gas duct with the air inlet of the dust collector to ensure that the connection is tight and the sealing is good to prevent air leakage and dust leakage. During the installation of the pipeline, attention should be paid to the support and fixation of the pipeline to avoid vibration or deformation of the pipeline during operation.
Power supply and control system installation: connect the power cord according to the equipment requirements, and install the corresponding control system. The control system should be installed in accordance with safety specifications and be easy to operate and maintain.
Bag installation: Before installing the bag, the bag should be inspected and cleaned to ensure that the bag is not damaged, clogged or attached. Install the bag correctly according to the requirements of the manual, ensure that the bag is installed tightly and flat, and avoid displacement or wear of the bag during operation.
Commissioning and trial operation: After the installation is completed, the 120-bag stand-alone bag filter should be debugged and test-run. During the commissioning process, check whether the performance indicators of the equipment meet the design requirements, and pay attention to the operation status and sound of the equipment. During the trial operation, the flue gas flow and load should be gradually increased to test the adaptability and stability of the equipment.
Maintenance and maintenance: During the operation of the equipment, the 120-bag stand-alone bag filter should be regularly maintained and maintained. It includes checking whether the cloth bag is damaged or blocked, cleaning the dust inside the equipment, checking the operation status of the pulse valve and control system, etc. For equipment wearing parts such as filter bags, pulse valves, etc., they should be replaced in time to ensure the normal operation of the equipment.
IV. Conclusions
The installation and use of 120 bags of stand-alone bag filter requires certain technical requirements and specifications. Correct installation and use not only ensure the normal operation of the equipment, but also help to improve the efficiency of dust removal and prolong the service life of the equipment. Therefore, it is recommended that during installation and use, operation and maintenance should be carried out in strict accordance with the instructions and relevant specifications, and professional and technical personnel should be communicated and solved in time when problems are encountered to ensure the stability and safety of the equipment.