Stainless steel capillary tube is generally used for the protection of automation instrument signal tubes, automation instrument wire protection tubes, electronic equipment line protection tubes, thermal instrument capillaries and the internal support of hollow high-voltage optical cablesIt depends on how high the customer's quality requirements for pipe fittings are, in order to decide which process to use, let's take a look at the introduction of the following four cutting technologies:
1. Grinding wheel cutting: This is the most used cutting back method, as the name suggests, it is to use the grinding wheel as the cutting tool to cut the stainless steel on itIt is also the most costly cutting method, but because it will produce a lot of burrs after cutting, it is necessary to deburr the process in the later stage. Some customers do not require burrs for pipe fittings, and this method is the simplest and least costly.
2. Wire cutting: It is to make the stainless steel capillary ** cutting machine for wire walking, but this method will cause discoloration of the nozzle, in case of strict buyers, it needs to be processed through later processing, such as polishing and grinding.
3. Metal disc saw cutting: The impact of the pipe fitting incision using this cutting technology is not large, and several can be cut together, and the efficiency is very highHowever, the disadvantage is that the chips tend to stick to the tool, so you have to be very careful in the selection of saw blades.
Fourth, laser cutting: the quality of the stainless steel capillary cut by laser is the best, the nozzle is stabbed, the size is accurate, the material near the incision is not affected, and the efficiency is high, zero consumables, safety, environmental protection and zero pollution, only need to be powered on to automatically operate, saving labor. Generally, it is suitable for customers who have high requirements for the quality of pipe fittings and small dimensional errors, and are mostly used in precision instruments and equipment.
The above is the introduction of stainless steel capillary cutting technology, different cutting methods will have corresponding advantages and disadvantages, or depending on the needs of customers;In addition, the quality of stainless steel pipes is also affected by the quality of cutting equipment and the proficiency of cutting technicians. Stainless steel capillary