After a long process of reform of the annual examination system, the annual inspection of motor vehicles has been adjusted accordingly. The current regulations state that in the first 10 years of use, only regular annual inspections are required in the sixth and tenth years, and mandatory vehicle examinations are not required in the eighth year. For those cars that run for more than 10 cycles, they will be fully covered by the mandatory annual medical check-up once a year. This policy change is based on the reform of the annual inspection system in 2019 to reduce the frequency of secondary vehicle inspections, and the frequency of physical examinations is optimized and adjusted again.
What is "3 plus 6 minus"?
"3 plus" refers to the addition of 3 test items.
Increase vehicle tire pattern detection
As we all know, the guarantee of automobile safety performance is closely related to the performance of its tires, therefore, the relevant departments decided to include tires in the annual inspection category, especially the tire tread depth for strict testing. If the tire pattern is too worn, it will be difficult for the vehicle to meet the annual medical examination standards, and in this case, the owner must consider replacing the tires with new ones.
Added vehicle wheelbase detection
Each type of car has a unique wheelbase profile, a design feature that does not allow for arbitrary adjustments or changes. Changes in the wheelbase can directly affect the safety factor and stability of the car. In view of the fact that many young consumers are keen to carry out various forms of modification of their cars, it is necessary to implement strict inspection management of the wheelbase of the car during the annual physical examination. If there is a discrepancy between the actual value of the wheelbase and the factory set value, it will affect whether the car can successfully pass the annual medical examination.
Chassis detection added
The role of the chassis in the car is undoubtedly crucial, whether it is for fuel-based power equipment or emerging new energy vehicles. The chassis not only bears the gravity load of the entire vehicle, but also carries the engine and transmission of fuel vehicles, as well as key components such as lithium-ion batteries and electric motors in new energy vehicles. In order to ensure driving safety, the chassis should also be included in the annual inspection process that Weiyuan attaches great importance to.
"6 reductions" refers to the reduction of 6 test items.
Eliminate car noise detection
Thanks to the rapid development of advanced automobile manufacturing technology, the problem of automobile noise has been fundamentally solved, especially more and more new energy vehicles almost no longer produce disgusting noise. As a result, the detection of car noise has gradually lost its original practical value.
Cancel vehicle suspension detection
In fact, every auto part has its own service life, and various failures may occur after a long period of use. However, considering that Hyundai cars can still maintain good normal operation after a decade or more of driving experience, we decided to relax the inspection of the vehicle's suspension system during the annual medical examination.
Abolish the annual review of violence
In the past few annual physical examinations, some testers will Xi increasing the engine speed to about 5000 to 6000 rpm, which has caused a large number of car owners to question and worry about the safety of their vehicles. But fortunately, with the rapid development of automotive technology, there is no longer a need for such extreme high-speed acceleration operations when the annual inspection work is carried out for exhaust emission testing, which means that the reckless annual physical examination method in the past has withdrawn from the historical stage.
Cancel the speed check
All kinds of cars exhibit different maximum speeds, and theoretically, the higher the speed, the less safe the vehicle may be. Therefore, in consideration of driving safety, safety speed monitoring facilities are installed on many roads, and drivers are also subject to a comprehensive inspection of the vehicle's speed limit during the annual medical examination. However, given the widespread adoption of advanced safe speed warning systems in modern motors, speed detection is no longer a major concern.
Cancel light deviation detection
In the past, most cars would choose to use halogen bulbs as the light source, but due to the technical limitations of the time, it was inevitable that the phenomenon of light deviation would occur. However, in today's era, the vast majority of cars have begun to rely on LED light sources with higher brightness, more energy saving, and more durable, and the requirements for automotive lights have been greatly reduced, as long as the lights can provide a bright enough lighting environment.
Cancel Handbrake detection
Looking back on the past, almost all cars mostly use mechanical handbrakes to complete braking operations, so in the annual physical examination, the corresponding inspection process is specially configured for such handbrakes. However, the vast majority of cars on the market today are gradually equipped with electronic handbrakes that are more efficient, convenient and safer, so the handbrake detection program has become a thing of the past.
What do you think about this?