ZEISS laser handheld 3D scanners are used in 3D reading of mold designs

Mondo Technology Updated on 2024-01-20

With the development of society, the word efficiency is very important, it can be said that efficiency determines the key to the survival of a product, so now many industries have adopted high-tech to replace labor, this convenience reduces labor costs, on the other hand, it improves efficiency, so today I will introduce a method that can improve product production efficiency, we know that the mold I use can be used for too long, which will cause the quarter pieces to be worn, so we will make a lot of such parts in advance, but if we have not thought about it in advance, or after the parts are producedWhat if we want to copy a part?And what's more, when we don't even have a little bit of 3D data, what if we want to copy a part?Then let's use a small mold part as an example, ZEISS Sanben precision instrument to introduce a method that has become popular in recent years, 3D scanning is also known as 3D scanning.

Click here - 3D Scanner - Industrial Measuring Instruments - *Inquire

This part is the insert on the mold, everyone should know the role of this part, that is, it is integrated with the mold, but in order to save costs, the material of the insert is often harder and better than the mold, but the insert is also more worn when the mold is working, so there are generally several spare tires. So how do we produce it without 3D data?"Spare tire".

2. Of course, we have to use a popular technology in recent years, three-dimensional scanning technology, which can quickly copy the data of the product, and what about the errorJust a few wires, than a few manual measurement methods that can be said to be negligible, of course, many people will use the dot to copy ah, of course it's not impossible, but for such a part you have to dot at least ten days and half a month, so the time cost is actually a big cost.

3.The person used scanning technology to scan out the two-dimensional data of the part, but there was a defect in the scanning that the 30 data was in the shape of a point, not in the form of a surface or a body, so such three-dimensional data could not be directly compiled, so we had to work hard for a three-dimensional modeler to get editable data, as long as we resurfaced and remodeled with them, and then obtained editable 3D data.

4.Then after obtaining the 3D scan data, we can use these data as a reference, trace the surface and then obtain the volume, and then use the drawn data to process it, so as to obtain a copy of the quarterly piece.

In summary, in fact, this method has played a great role in the production of products, or when copying products, because the scanned data is almost the same as the prototype, and the efficiency is very high.

3D scanners

Related Pages