Aluminum foil centrifugal glass wool tube shell is a tubular thermal insulation material composed of glass fiber and adhesive, which is specially used for thermal insulation of various types of small and medium-sized pipe (such as HVAC, refrigeration, steam, etc.), and can work normally at an ambient temperature of -50 400.
The aluminum foil centrifugal glass wool tube shell has the performance characteristics of thermal insulation, corrosion resistance, fire resistance and high temperature resistance, easy installation, and light material. It is widely used in the thermal insulation of heating pipes, air conditioning pipes and refrigeration equipment in civil buildings or industries, and the energy-saving effect can be increased by 15-30%. Below, Utesen insulation manufacturers will explain the installation steps of aluminum foil centrifugal glass wool pipe shells.
1. Preparation.
Before construction, materials and tools need to be prepared, including customized aluminum foil centrifugal glass wool tube shells, cutting tools, fixing tools, gloves, masks, etc.
2. Cut the aluminum foil centrifugal glass wool tube shell.
According to the actual needs, the glass wool pipe shell is cut into a pipe section of appropriate size with a cutting tool, and then the obtained pipe section is neatly cut into a gap.
3. Clean the surface of the pipeline.
Before installing the glass wool pipe shell, the surface of the pipe needs to be cleaned to make it free of impurities such as oil stains and dirt.
4. Install aluminum foil centrifugal glass wool tube shell.
The cut glass wool tube shell is installed on the pipe and then fixed with aluminum foil tape or other fixing material. It should not be too tight or too loose when fixing, and ensure that the glass wool tube shell is not loose or falls off. When the two sections of glass wool tube shell are spliced, the contact should be tight, and there should be no large gaps, so as not to increase heat dissipation.
5. Sealing. Seal the splicing seams and joints with aluminum foil tape to prevent heat leakage.
6. Inspection and cleaning.
After the installation is completed, the installation quality of the glass wool sleeve is checked to ensure that there are no loopholes or voids. Clean up the work area and clean up the debris such as discarded glass wool shards.
The above is the content explanation of how to install the aluminum foil centrifugal glass wool tube shell, I hope it can help you. If you want to know more about glass wool in the future, please pay attention to Utesen glass wool manufacturers.