MS59PB lead brass wire rod is a metal material with special properties, and it has a wide range of applications in many fields. This wire rod is made of an alloy of copper and lead, which has a higher content of lead and therefore has higher strength and hardness. At the same time, due to the presence of lead, this wire also has good corrosion resistance and wear resistance, and can resist the effects of various harsh environments.
MS59PB lead brass wire rod undergoes rigorous processing and heat treatment during the manufacturing process to ensure that it has excellent mechanical and physical properties. This wire has high electrical and thermal conductivity and is able to meet the needs of a wide range of electrical and electronic devices. In addition, it has good machinability and weldability, which is convenient for manufacturing and joining.
In terms of application, MS59PB lead brass wire rod is widely used in wires, cables, auto parts, shipbuilding, chemical pipelines and other fields. In terms of wires and cables, it is used to manufacture wires and cables of various specifications to meet the needs of power transmission and communication networks. In terms of auto parts, it is used to manufacture key components such as brake pipes and fuel pipes to ensure the safety and reliability of automobiles. In shipbuilding, it is used to manufacture important components such as hull structures, ship pipes, etc., to improve the corrosion and wear resistance of ships.
Grade: MS59PB lead brass wire
European standard steel grade CW614N
Corresponds to the standard EN 12166-2016
Copper and copper alloys: general purpose wires
copper and copper alloys - wire for general purposes
Classified as copper and copper alloys
Tags: copper, zinc, lead, alloy, lead, brass
Description This European standard specifies the composition, performance requirements, and dimensional tolerances for copper and copper alloy wires used in the manufacture of springs and fasteners for general purpose. Sampling procedures, test methods for verification of compliance with the requirements of this standard, and delivery conditions are also specified.
Density 84 g/cm3
MS59PB chemical element composition content (%)
Composition: Fe Ni Cu Pb al Sn Other Total More
Minimum - 57 25 - zn: margin
The maximum value is 03 0.3 59 3.5 0.05 0.3 0.2
Other individual or other aggregate chemical compositions include chemical compositions with values not specified in the table. Analysis should only be carried out if it is assumed to be present or in routine analysis, and there are indications that its components will exceed the specified values.
MS59PB mechanical properties
Diameter* Markings Heat treatment or state Tensile strength Yield point Elongation or elongation after break Hardness
d σb σs δ hbw
mm mpa mpa %
6 ms59pb0-h095 h095 hv
1.5 ms59pb0-h115 h115 115~170
1.5 ms59pb0-h145 h145 ≥145
I heard that it is popular now