It is one of the common problems that the program-controlled diaphragm filter press does not maintain pressure, which may lead to poor filtration effect and even affect the normal operation of the production line. This article will be the first program-controlled diaphragm filter press does not maintain pressure and treatment methods.
First of all, we need to understand what a programmable diaphragm filter press is and why it does not hold pressure. Programmable diaphragm filter press is a commonly used solid-liquid separation equipment, which separates solids and liquids by applying pressure to pass liquids through filter cloths. If the filter press cannot maintain pressure, the filtration performance will be affected and may even lead to the downtime of the production line.
Next, we will ** the common reasons why the program-controlled diaphragm filter press does not maintain pressure. First of all, it could be due to a problem with the hydraulic system, such as a faulty oil pump or a poor cylinder seal, etc. Secondly, the material or installation method of the filter cloth can also cause the problem of not holding pressure. In addition, the equipment can also be used for a long time, the filter cloth is blocked, and the pipe connection is not tight.
In view of the above problems, we can take the following measures to deal with the problem of non-pressure retention of the program-controlled diaphragm filter press. First of all, you need to check whether the hydraulic system is working properly, including components such as oil pumps and cylinders. If a fault is found, it needs to be repaired or replaced in time. Secondly, it is necessary to check whether the material and installation method of the filter cloth meet the requirements, and if you find that the filter cloth or installation method is not suitable, it should be replaced or adjusted in time. At the same time, regular cleaning and replacement of the filter cloth is also one of the necessary maintenance measures. In addition, check whether the pipe connection is tight, and if you find problems such as poor connections or air leaks, you should repair them in time.
In addition to the above measures, there are some other ways to deal with it. For example, the pressure of the hydraulic system can be appropriately increased to improve the pressure holding capacity of the filter press. In addition, the operating parameters of the equipment can be adjusted, such as increasing the filtration time or decreasing the filtration rate, etc., to improve the filtration effect. At the same time, for some more serious failures, such as aging or damage to the cylinder seals, it is necessary to replace the seals or the entire cylinder assembly in time.
In conclusion, the non-pressure retention of the programmable diaphragm filter press is a common problem, but it can be effectively solved by inspecting components such as the hydraulic system, filter cloth and pipes and taking appropriate treatment methods. In the process of daily use, it is also necessary to strengthen the maintenance and maintenance of the equipment, and regularly inspect and repair key components to ensure the normal operation of the program-controlled diaphragm filter press and the stability of the filtration effect. At the same time, for some more complex faults or problems, it is recommended to seek professional help and guidance to ensure that the repair and maintenance of the equipment is properly handled.