I want to replace the Mercedes-Benz wipers by myself, but I don't know how to disassemble and install them?Don't worry, for now, I'm going to explain how to remove and install Mercedes wipers in as simple words as possible.
To be on the safe side, make sure the car is turned off and powered off. Next, open the front lid of your car and find the location of the wipers. Usually, the wipers are installed in the corner of the engine compartment.
At the bottom of the wiper, you can see two plastic clips, which are fixed to the main shaft of the wiper. Use an appropriate tool, such as a flathead screwdriver or a small flat tool, to pry these clips away from the spindle.
Once the clamp is pried open, the wiper becomes loose. At this point, you can unplug the entire wiper from the spindle.
As for installing a new wiper, the steps are relatively straightforward. In reverse order of disassembly, clamp the clamp to the spindle first, and then gently press the wiper against the clamp.
Make sure the new wiper is tightly mounted on the spindle and is not loose or wobbly. Finally, reclose the front cover of the car and start the vehicle for testing. Turn on the wiper switch and check if the new wiper is working properly.
There are a few things to keep in mind: Whether it's when removing or installing the wipers, make sure the car is turned off and powered off to avoid electrical problems or injuries.
Use appropriate tools to pry open the clip, don't use too much force, so as not to damage the clip or spindle, you can buy related tools online, be sure to dedicate!
When installing a new wiper, make sure it fits snugly on the spindle so that it doesn't wobble or make a rattle when in use.