In the hot summer, the high temperature of the plant causes great trouble to production and work, what are the common solutions to plant cooling?Plant ventilation and cooling First of all, the natural ventilation of the plant is the simplest and most economical way to ventilate and cool the plant, we can set up air inlets and exhaust outlets for the plant reasonably, or open air buildings and skylights on the roof of the plant, and make full use of natural airflow such as hot pressure and external wind speed to achieve ventilation, but these methods may have limited effect in the high temperature season.
Then mechanical ventilation is used in the plant can not easily achieve natural ventilation in the place, through the use of negative pressure fan such exhaust equipment to strengthen the air flow in the plant, improve the ventilation effect of the plant, but whether it is mechanical ventilation or natural ventilation, in the high temperature season to ventilate and cool the plant can only be as close to the outdoor temperature as possible, and can not really achieve cooling. Next, let's take a look at what ways can both ventilate and cool the plant
The first type: wet curtain + negative pressure fan ventilation cooling mode, this way is a more economical method, the cooling principle of the wet curtain through the evaporation of water on the surface of the wet curtain, absorb the heat in the air, reduce the air temperature, but the wet curtain must be matched with the fan, and at the same time, the plant also needs to have a reasonable airflow organization form.
The second type: evaporative air cooler ventilation and cooling system, it is a commonly used equipment for ventilation and cooling of modern plants, and the air cooler also uses water evaporation to reduce the temperature of the workshop, but the air cooler is mostly used for positive pressure ventilation and cooling or local post fixed-point air supply and cooling.
The air cooler can also be used in combination with many plant cooling equipment, so that it can maximize its efficiency, such as: air cooler + industrial fan, air cooler + negative pressure fan, etc., only by comprehensively using a variety of methods or choosing a combination of solutions, in order to more effectively deal with the problem of high temperature and stuffiness in the summer plant.