Dear readers, have you encountered the same problem: Wanhe water heater suddenly stopped burning?Don't worry, we're going to solve this problem together today.
1 Check the power supply.
First of all, we need to check if the power supply of the water heater is working. If the power plug is loose or damaged, it will cause the water heater to not start properly. The solution is simple, just plug the plug tightly or replace it with a new one.
2 Check the water pressure.
Wanhe water heaters need a certain amount of water pressure to work properly. If the water pressure in your home is too low, it will cause the water heater to not start properly. At this time, we can try to open the inlet valve of the water heater, or contact the property to check if the water pressure is normal.
3 Clean the strainer.
After using the water heater for a long time, the filter will accumulate a large amount of impurities and dirt, resulting in poor water flow and affecting the normal operation of the water heater. Therefore, we need to clean the filter regularly. The cleaning method is also very simple, just disassemble the water pipe, take out the strainer, and rinse it with clean water.
4 Check the gas path.
If none of the above methods can solve the problem, then we need to check whether the air path of the water heater is normal. Poor gas paths can lead to difficult or impossible ignition. At this time, we can disassemble the casing of the water heater and check whether the air circuit is leaking or blocked. If there is a problem, you need to contact a professional for repair in time.
I hope this article can help you solve the problem of water heater not igniting. If you have any further questions or need more help, please feel free to contact us.