The acceptance process of the finely decorated house needs to be rigorous, steady and rational, and do not pay the property fee, let the property take you to inspect the house, and then pay the property fee after rectification. Here are some home inspection considerations:
Check whether the sealing strip of the door frame is intact and whether the window sealing strip is intact to ensure the waterproofing effect in the future.
Don't rush to pay the strata fee, let the property take you to inspect the house first, and make sure that all the problems are rectified before paying the strata fee.
Check the strong and weak current of the household, including whether the circuit of the strong current box is complete, whether the weak current box has a socket, and whether the optical modem uses a Category 5e network cable.
Acceptance of the wall and floor tiles of the living room: use a strong flashlight to check whether there are gaps in the wall paint, and beat the floor tiles of the living room with the floor tiles of the floor tiles to check whether there are hollow drums.
Socket detection: Use a phase meter to detect sockets, including those in the bathroom, to test whether the leakage protection function is normal and whether the grounding wire is normal.
Touch the cross-to-cross joints of the wall tiles in the bathroom to check whether they are flat and non-stinging, and use a hollow drum hammer to check whether the tiles are hollow along the wall and floor.
For bathroom cabinets, if it's dangling, press it with both hands to see if it collapses.
Toilet acceptance: Draw five pieces of toilet paper and throw it in to flush and see if it can be flushed. At the same time, wipe the lower part of the faucet with a paper towel to check for leakage.
Floor drain drain detection: Pour a bottle of water into it and see if it drains quickly.
A priori the basin, pay special attention to whether the basin is stable when washing vegetables, and press down hard to make sure that it will not collapse.
Check that the joints of countertops and walls are not glued with anti-mold glue, if not, mold and blackening may occur in the future.
Cabinet inspection: Touch the bottom four support screws of each partition to see if they are complete. At the same time, check that the doors are flat and can be opened and closed smoothly.
Hardware inspection: check each rubber chain to ensure its stability.
Range hood acceptance: Place a lit cigarette under the range hood to observe whether it can be sucked normally.
Wear flat shoes, stomp the floor, and listen for squeaks. If there is a bay window, focus on checking the top for mold and watermark peeling.
Carefully accept the above parts and do not step on the pit.