The emergence of photovoltaic power station fence network is due to policy support, photovoltaic power stations have sprung up like mushrooms after a rain, because the demand for electricity in the current society is gradually increasing, and for photovoltaic power generation to contribute to the national power industry. Photovoltaic power station fence is mainly used for photovoltaic power generation facilities to protect and isolate the fence. Protect photovoltaic facilities from damage to people or animals.
Product features: photovoltaic power station fence does not need molds, low cost, easy to form, short construction period, product mesh is smooth, anti-aging, corrosion-resistant, not easy to be deformed by external forces, flexible product installation and transportation, and not affected by hilly shape.
Photovoltaic power station fence installation method
One: Set the distance from the pit to the pit:
According to the length of the fence net column to the column, such as the size of the guardrail is 18x3 meters, then the distance from the pit to the pit is 3 meters. Be able to use a tape measure to mark the midpoint of all pits.
Two: Digging a pit:
Generally speaking, if it is not a particularly high or special requirement of the photovoltaic plant isolation network, we generally bury 30 cm and can dig a 30x30x30cm pit.
Three: place the column, fill ten or coagulation ten:
In order to prevent the column from tilting, the column can be supported with a fixed object, and the position of the column to the column can be measured again, and the column can be fine-tuned if it is not right. If it is to make the guardrail stronger, it can be filled with concrete. Wait for the concrete to dry thoroughly before carrying out the mesh device.
Four: Device mesh:
Determine the orientation of the mesh, if it is 10 cm above the ground, you can make a symbol on the column. After that, the ears on the column are aligned with the double filaments on the edge of the mesh and fixed with screws.
And so on, the remaining photovoltaic power station fence mesh is installed.