cadcha is a chamfer command.
1. First, open CAD2014 and open the file we need to chamfer the drawing.
2. Directly enter the chamfer command shortcut key "cha", and press the spacebar to confirm to enter the chamfer command.
3. In the chamfer command, we need to select two straight lines that are angled, and directly left-click the straight line in the drawing area to select it, and the straight line will become a dashed line, and prompt us to select the second straight line.
4. Left mouse click, select all two straight lines, and the system will automatically add chamfers according to the position of the two straight lines.
1. First, open CAD2014 and open the file we need to chamfer the drawing.
2. Directly enter the chamfer command shortcut key "cha", and press the spacebar to confirm to enter the chamfer command.
3. In the chamfer command, we need to select two straight lines that are angled, and directly left-click the straight line in the drawing area to select it, and the straight line will become a dashed line, and prompt us to select the second straight line.
4. Left mouse click, select all two straight lines, and the system will automatically add chamfers according to the position of the two straight lines.
1. First, open CAD2014 and open the file we need to chamfer the drawing.
2. Directly enter the chamfer command shortcut key "cha", and press the spacebar to confirm to enter the chamfer command.
3. In the chamfer command, we need to select two straight lines that are angled, and directly left-click the straight line in the drawing area to select it, and the straight line will become a dashed line, and prompt us to select the second straight line.
4. Left mouse click, select all two straight lines, and the system will automatically add chamfers according to the position of the two straight lines.
The F shortcut in CAD is generally used for rounding, but it can also be used for rounding, but it will have slightly different settings. First, open CAD, find the file that needs to be chamfered right angle, press the shortcut key F and then space to confirm, at this time you need to enter the value R, which is the value of the radius.
The method of chamfering right angles with f is completely reversed, because the radius needs to be entered when rounding, so the radius is directly entered as 0, and then enter after selecting these two lines, the value is the same as before the round, so the pattern will return to the appearance of right angles.
You can directly use the special shortcut key cha, enter cha in the command bar or find the "chamfer" option in the toolbar, you can start to select each line in turn, enter the distance of the chamfer after opening, if you need to enter the angle, you can click on the first line and enter the angle.
FactoryTalk View Studio and RSLINX software and corresponding licenses are required if the firmware version of HMI is lower than 4If it is 0, you may only be able to back up the operation.
Open the ME software, scan the HMI node through RSLINX, click to select the upload file, and then you will be prompted to save the name and path of the file, just follow the prompts.
FactoryTalk View Studio and RSLINX software and corresponding licenses are required if the firmware version of HMI is lower than 4If it is 0, you may only be able to back up the operation.
Open the ME software, scan the HMI node through RSLINX, click to select the upload file, and then you will be prompted to save the name and path of the file, just follow the prompts.
FactoryTalk View Studio and RSLINX software and corresponding licenses are required if the firmware version of HMI is lower than 4If it is 0, you may only be able to back up the operation.
Open the ME software, scan the HMI node through RSLINX, click to select the upload file, and then you will be prompted to save the name and path of the file, just follow the prompts.
At this point, the above is the introduction of the question of how to open the cha file, I hope these 4 answers are useful to you.