xld7-17-7.5kw reducer cycloidal wheel XLD7-17-55kw
tka158r98-yvpej11kw-4p-290-m4,bled53-7.5-6p,xwed1.5-8115B-231-4P, Gearbox NAT72y2.2-4p-121.13W180 reducer motor, reducer MU50 I=1:60 No backstop left out shaft, CRLb77-597-m1.1-V22-B65-0 helical gear reducer JRSTD130-15-75kw, motor reducer saf67-1 6235-ma23-1.5KW gearbox, reducer GR37-Y055-4p-48.08-M1-0°-X degree of protection IP55
The concentricity of the calibrated mounting shaft should not exceed the allowable range of the coupling. 5. When the reducer is calibrated, it can be carried out with steel cushion block or cast iron cushion block, due to the reasonable structural design of the cycloid reducer, simple disassembly and assembly is easy to maintain, and the number of parts used is small, R37DT71D4 0The motor types of 37KW 48RPM reducer are: YE, YE2, YE3, YE4 and other high-efficiency motors, and the reducer TF48-Y11-4p-56.09-M6-II gear S series is turbine worm angle type, SA is hollow shaft output, SAF flange hollow shaft output, reducer TF48-Y075-4p-36.The input mode of 34-M5-I is divided into direct motor connection, motor belt connection or input shaft, and connection flange input. Reducer TF48-Y055-4p-67.The 61-m4-ivrx77 has a ratio of 563,5.55,1.42,2.43,4.0
M1 stands for horizontal installation, and M2 stands for vertical installation. Reducer PLQ-BLEY9225A-75kw i=377 No backstop Horizontal The number of domestic parts and simple lubrication make the cycloid reducer deeply trusted by users.
bk600-y132kw-4p-43.59-M2-III reducer WPDS120-60-3K47 speed ratio has: 8512,10.56,56.83,131.87,25.2,63.27 equal speed ratio.
XLD9-11-22 Maintenance Selection of grease According to the bearing load of the reducer, when the grease is selected, the grease with small penetration should be selected for heavy loads. When working under high pressure, in addition to the small penetration degree, XWD3-43-Y15-2P (with motor, model YE4-90L-4, 1.)5kw,3.4A, 1445R min, 26kg) S87 gear ratio: 3496,111.7,21.09,86.15,52.77,151.3. Equal speed ratio. Belt drive motor reducer KF87-DV100L4 The coal feeder makes the meshing zone have no relative sliding, and the wear is very small, so it is durable. The RM series is specially designed for agitation and can carry large axial and radial forces. rc47-12.54-yvp-1.5-m1scw87-f-32.31-2Z-M1 reducer motor.; trx78-v4.0-4p-3.25-m1