In the auto parts manufacturing industry, the production and manufacturing of automobile forging parts and automobile stamping parts need to use hydraulic press equipment and stamping dies for production, which not only has good strength and rigidity, but also has a simple process, good dimensional consistency, less material consumption, improves production efficiency, and can also reduce production costs, which can enable rapid development.
This article introduces a 500-ton four-column hydraulic press, also known as auto parts forming hydraulic press, auto parts stamping and forming machine, mainly used for stamping automotive aluminum parts, the fuselage adopts a three-beam four-column structure, with high rigidity and high precision, suitable for the drawing, forming and pressing process of various auto parts. It can be replaced with different molds to process and produce auto parts such as automobile brake pads, automobile panels, automobile doors, automobile interiors, automobile front cab stretching, etc.
The fuselage of the 500-ton auto parts molding machine adopts a three-beam and four-column structure, which is mainly composed of an upper beam, a slider, a workbench, three columns, a master cylinder, an electrical system and a hydraulic system. The fuselage is a four-column structure, and the stressed parts are optimized to design, which is beautiful in appearance and economical and applicable; The three beams are welded with high-quality steel plates, and high-temperature annealing treatment is used to eliminate welding stress and ensure rigidity. The main rod adopts a four-nut structure, which improves the preload performance and can maintain the stability of accuracy for a long time; The surface of the piston rod and column is quenched and plated with hard chrome to improve the wear resistance and prevent surface corrosion and scratches; The advanced cartridge valve is used for compact structure, which reduces pipeline connection, improves the tightness of the system, and reduces leakage.
Features of 500 ton auto parts stamping and forming machine:
1. The auto parts stamping and forming machine has two structures, such as a four-column frame, and the fuselage is made of limited components for structural analysis and optimization design, and the structure is reasonable.
2. The hydraulic control adopts the cartridge valve integrated system, which has small impact, reliable action, long service life and less leakage.
3. Automatic lubrication device for slide rail.
4. The stamping and forming machine for auto parts can realize two molding processes: constant pressure pressing and fixed process pressing, with the function of holding pressure and rolling time, and the delay time can be adjusted.
5. The working pressure and stroke can be adjusted according to the process standards within the specified range, and the operation is convenient.
6. Centralized control of buttons, with three operation modes: adjustment, manual and semi-automatic.
7. Configure mobile workbench on demand, with high efficiency.
8. The hydraulic system is controlled by integrated cartridge valve, which is sensitive, reliable and leakage-free;
9. PLC control electrical system, reliable performance and good softness;
The four-column hydraulic press is equipped with a hydraulic safety circuit and a dead-center locking mechanism on the slider, which has a good safety factor.
500 ton auto parts stretching hydraulic press 500 ton four-column hydraulic press.