The filtration system of the fully automatic chamber filter press plays a very important role in the daily work, which can complete the filtration and dewatering work efficiently. This article will introduce the composition and daily cleaning methods of the filtration system of the automatic chamber filter press to help users better use and maintain the equipment.
The automatic chamber filter press filtration system is composed of multiple parts, including feeding system, filtration system, hydraulic system, electronic control system, etc. Among them, the feeding system is responsible for evenly distributing the material to the filter cloth, the filtration system separates the moisture in the material through the filter cloth, the hydraulic system is responsible for providing the pressure and action required for filtration, and the electronic control system is the control center of the whole system.
In daily use, the automatic chamber filter filter system needs to be cleaned and maintained regularly to ensure the normal operation and service life of the equipment. Here are some common daily cleaning and maintenance methods:
1.Regularly check the integrity and cleanliness of the filter cloth, and if it is found to be damaged or blocked, it should be replaced or cleaned in time. At the same time, it is necessary to ensure that the filter cloth is installed correctly to avoid leakage.
2.Regularly check the oil level and oil quality of the hydraulic system, and if the oil level is found to be too low or the oil quality has deteriorated, the hydraulic oil should be replenished or replaced in time. The cleanliness of the hydraulic oil is very important for the proper operation of the hydraulic system, so it is necessary to filter or replace the hydraulic oil regularly.
3.Regularly inspect the control components and wiring of the electronic control system to ensure that there are no loose or broken conditions. At the same time, it is necessary to keep the inside of the electric control box clean and dry to avoid damage or short circuit of the components.
4.Conduct regular comprehensive inspection and maintenance of the equipment, including checking whether the various parts of the equipment are operating properly, cleaning the residual materials and debris inside the equipment, and lubricating the equipment.
5.In the process of use, it is necessary to ensure the uniformity and stability of the feeding material to avoid overload or overload. At the same time, the parameters and settings of the equipment should be reasonably adjusted according to the characteristics of the material and the process requirements.
In addition to the above daily cleaning and maintenance methods, the automatic chamber filter filter system also needs to pay attention to the following points:
1.During the operation of the equipment, it is necessary to pay close attention to the operation status and various parameters of the equipment, and stop the machine for inspection and treatment in time if abnormal conditions are found.
2.During use, keep the equipment tidy and dry to avoid moisture and corrosion. At the same time, the equipment should be regularly dusted and dusted to maintain good heat dissipation.
3.In the process of maintenance and maintenance, it is necessary to operate in strict accordance with the operation manual and maintenance requirements of the equipment to avoid damage to the equipment or safety accidents.
4.For some special material and process requirements, reasonable operation procedures and maintenance plans should be formulated according to the actual situation to ensure the normal operation and use of the equipment.
In a word, the daily cleaning and maintenance of the filtration system of the fully automatic chamber filter press is an important job that needs to be taken seriously by the user. Only the correct use and maintenance of the equipment can ensure the normal operation and service life of the equipment, and at the same time improve the work efficiency and production efficiency of the equipment.