Before you start reading this article, you may not know much about the selection method of special cutting fluid for aluminum-plastic doors and windows in Haixi Prefecture, but after reading, you must have a deeper understanding of this.
The selection method of special cutting fluid for aluminum-plastic doors and windows in Haixi Prefecture mainly considers the following aspects: material characteristics, cutting requirements, environmental friendliness and economy.
1. Material characteristics:
1. Corrosion resistance: The cutting fluid of aluminum-plastic doors and windows should have good corrosion resistance, which can prevent the corrosion of the cutting fluid on the materials of aluminum-plastic doors and windows.
2.Non-volatile: The cutting fluid is required to be non-volatile, reducing the pollution of volatiles in the cutting process to the environment and the health impact of workers.
3.Lubricity: The cutting fluid should have good lubricity, reduce cutting friction, reduce friction heat, and prolong tool life.
2. Cutting requirements:
1. Effect: The cutting fluid should be able to provide good cooling effect, reduce the cutting temperature, prevent the chips from sticking to the bed or welding, and maintain the quality of the cutting surface.
2.Cleanability: Cutting fluids are required to be able to effectively clean chips and debris in the cutting area, keep the tool and workpiece clean, and prevent the formation of flash film.
3. Environmental friendliness:
1. Low pollution: The cutting fluid should be low volatile, low toxicity, not polluting the environment, and meeting the requirements of environmental protection.
2.Utilization: The cutting fluid should be easy to handle, convenient to use, and reduce the waste of resources.
Fourth, economy:
1. Long-term effect: the cutting fluid should have a long service life, prolong the replacement cycle of the cutting fluid, and reduce the cost.
2.*Moderate: cutting fluid should have a reasonable market**, which can meet the economic needs of users.
Characteristics, principles and applications of special cutting fluid for aluminum-plastic doors and windows in Haixi Prefecture:
1. Features: Haixi aluminum-plastic door and window special cutting fluid has good corrosion resistance, non-volatile and lubrication, which can provide high-quality cooling effect and cleanability, reduce cutting temperature and friction heat, and prolong tool life.
2.Principle: The cutting fluid is added with suitable antioxidants, preservatives and lubricants, which can react with the metal ions and cutting chips generated during the cutting process to form a protective film and lubricating film, reducing friction and wear in the cutting area.
3.Application: Haixi aluminum-plastic doors and windows special cutting fluid is widely used in the cutting, milling, cold stamping and other processing processes of aluminum-plastic doors and windows, which can improve processing efficiency and processing quality, and ensure accuracy and surface quality.