The Tektronix AWG5200 Series Arbitrary Waveform Generator is a high-performance signal generator with a wide range of applications and flexible output setting options. When conducting experiments and tests, it is very important to set the output voltage correctly. Here are the detailed steps on how to set the output voltage of the Tektronix AWG5200 Series Arbitrary Waveform Generator.
Step 1: Connect the device and the power supply.
Connect the Tektronix AWG5200 Series Arbitrary Waveform Generator to the power supply to ensure that the device is in normal working condition.
Step 2: Select the output channel.
Tektronix AWG5200 Series Arbitrary Waveform GeneratorsIt has multiple output channels to output different signals at the same time. Select the output channel to be voltage set according to your actual needs.
Step 3: Enter the output settings interface.
On the function screen of the Tektronix AWG5200 Series Arbitrary Waveform Generator, find and enter the output settings screen. On this screen, you can set the output voltage in detail.
Step 4: Select the output mode.
According to your need, select a suitable output mode. The Tektronix AWG5200 series of arbitrary waveform generators are typically available in both conventional and differential mode options. Conventional mode is suitable for single-ended outputs, while differential mode is suitable for differential signal outputs.
Step 5: Adjust the amplitude parameters.
In the output settings interface, you can find the amplitude parameter setting options. Set the desired output voltage amplitude according to actual needs. By increasing or decreasing the amplitude value, you can adjust the voltage of the output signal.
Step 6: Determine the output impedance.
According to the needs of the experiment or test, select the appropriate output impedance. The Tektronix AWG5200 Series Arbitrary Waveform Generator can be set to an output impedance of 50 ohms or high impedance as required.
Step 7: Calibrate the output.
In order to ensure the accuracy and stability of the output, output calibration can be performed. In the output settings interface, you can find the calibration options. Follow the device's calibration instructions and perform the appropriate operations to calibrate the output voltage.
Step 8: Apply the output settings.
After setting the output voltage, select the application output setting according to your actual needs. When the settings are confirmed, the selected channel will output the set voltage.
It is important to note that the specific operation steps may be slightly different. Therefore, it is recommended to refer to the user manual of the Tektronix AWG5200 Series Arbitrary Waveform Generator for accurate and detailed operating instructions. In addition, you can learn about and master the functions and features of other Tektronix AWG5200 series arbitrary waveform generators to make better use of the device for experiments and test work.