1. Ariston water heater is faulty**E1, how to repair it?The display of e1 indicates some kind of malfunction of the machine (generally speaking, the machine will not ignite). If the water heater shows E1, it means: ignition failed or turned off halfway.
1. When the flame detection (feedback electrode) induced current is weak, it is judged that the burner has no fire, resulting in the interruption of the program. At this time, you can check whether the feedback electrode is in the flame high temperature area, adjust the height of the feedback electrode, and check the connection line and connector of the feedback electrode
2. Observe whether the combined electrode has discharge phenomenon from the window. In this case, the discharge distance of the combined electrode can be checked, and the connection and pulse generator can be detected.
3. The ignition pulse spark cannot be ignited normally. This situation is usually due to a faulty gas passage where no gas reaches the combustion chamber, resulting in an inability to ignite.
Because the fault code of each brand and model is set by the manufacturer differently.
2. What are the fault codes of Ariston gas water heaters?
1. E1 - failure of fan, air pressure switch and smoke pipe. Workaround: Restart and check if the water heater pipes are blocked.
2. E2 - ignition failure. Solution: Manually reset, and then check the gas switch to ensure that the water heater is supplied normally.
3. E3 - heating temperature sensor failure, sensor overheating. Solution: You need to reset or restart after power-off. If none of the above methods work, you need to report for repair.
4. E4 - the shower temperature sensor is faulty, and the sensor is overheated. Solution: You need to reset or restart after power-off. If none of the above methods work, you need to report for repair.
5.E5 – EEROM, Chip Failure. Solution: At this time, carry out the necessary manual reset, if it is not possible, then report for repair.
6. E6 - water heater system water shortage. Solution: Perform a reset operation or power off and restart. Then check if the water pressure on the pressure gauge is too low and refill the water.
7. E7 - false flame, no actual temperature rise. Solution: Reset or restart after power-off.
8. E8 - The water heater is blocked due to external factors, and the water heater cannot work normally. Solution: Check whether the gas in your home is stopped, and then check whether the flue is facing the wind. If not, you need to report for repair.
9. E9 - mechanical temperature control overheat protection of water heater. Solution: Ask the user if the heating tube is turned off. If everything is in order, please report for repair.
3. Precautions for the use of Ariston water heater:
Each Ariston electric water heater has a special instruction manual inside, saying that this set of instructions is the only operating instruction manual for the machine. After purchasing, please check whether the model on the manual is consistent with the purchased model. Only in this way can we use this water heater better. Generally speaking, the Ariston electric water heater instruction manual contains nine parts. We must strictly adhere to the precautions of each part.
Special attention should be paid to the installation and use specifications in the instructions. The caveats for these two parts must be clear. If the product cannot be used normally due to failure to operate in accordance with the instructions for use, it will not be repaired. Non-compliance with instructions and norms falls under the category of artificiality. Therefore, we consumers must pay attention to this when using.