In the production process,European version of the millOccasionally, there will be abnormal powder output, which causes a lot of trouble in the production process.
1. Problem diagnosis.
1.Uneven wear of grinding discs: Long-term use or improper maintenance may lead to uneven wear of grinding discs, resulting in serious local wear. This results in greater friction during the grinding process in areas of heavy wear, which can affect the quality of the powder.
2.Improper moisture of the material: The humidity of the material has a significant impact on the grinding effect. High humidity will cause the material to adhere to the grinding disc, reduce the friction between the grinding disc and the material, and affect the grinding effect. If the humidity is too low, the material may slide on the grinding disc, which will also affect the grinding effect.
3.Insufficient grinding pressure: Grinding pressure is a key factor affecting the grinding effect. If the grinding pressure is insufficient, it may cause the material to slide on the grinding disc and not be able to grind sufficiently, resulting in abnormal powder output.
4.Grinding disc rotation speed is too fast: Grinding disc rotation speed is too fast, which may lead to excessive centrifugal force on the grinding disc, so that the material cannot be fully ground, resulting in abnormal powder output.
Second, the solution.
1.Regularly inspect the grinding disc: Enterprises should regularly check the wear and tear of the grinding disc, and replace or repair the grinding disc in time if any problems are found, so as to ensure the uniform wear of the grinding disc.
2.Control the humidity of the material: according to the characteristics of the material, adjust the humidity of the material, so that it can maintain a good grinding effect during the grinding process, and will not cause the grinding disc to adhere to the material.
3.Adjust the grinding pressure: according to the hardness and grinding requirements of the material, adjust the grinding pressure appropriately to ensure that the material is fully ground on the grinding disc.
4.Reasonable adjustment of grinding disc speed: According to the characteristics of the material and grinding requirements, reasonably adjust the grinding disc speed to avoid the material being unable to fully grind due to too fast speed.
5.Clean the grinding disc and equipment: Clean the grinding disc and equipment regularly to avoid material residue and clogging and ensure the grinding effect.