Broken bridge aluminum window glass change tutorial

Mondo Home Updated on 2024-01-28

If the broken bridge aluminum window glass in your home is broken or you want to replace it with double insulating glass, the following tutorial will help you easily complete this task.

Prepare tools and materials.

Before you start, you'll need to prepare some tools and materials. Includes: flathead screwdriver, Phillips screwdriver, small hammer, detergent, double insulating glass, rubber sealing strips, etc.

Remove the sash windows. First, use a flathead screwdriver and a Phillips screwdriver to loosen the screws on the sash and remove the sash. Be careful, do not pull too hard, as the sash may have friction against the rails on the window frame.

Remove old glass.

After removing the sash, you can remove the old glass. Use a flathead screwdriver to pry the glass strip open, then gently remove the glass from the track by hand. Be careful not to use too much force to avoid damaging the glass and rails.

Clean tracks and window frames.

Before replacing the glass with a new one, you need to clean the track and window frame. It can be wiped with detergent and rags to make sure that no impurities or dirt are left behind.

Install new glass.

Now you can install the new glass to the window frame. The glass is placed in the track first, and then it is secured using a rubber seal. Make sure there are no gaps between the glass and the window frame and that the glass slides smoothly on the tracks.

Install the sash windows. Finally, install the sash back in place. Make sure that the gap between the sash and the window frame is even, and that the screws are tightened.

Commissioning and inspection.

After the installation is complete, open the windows for commissioning to ensure that the glass can be opened and closed smoothly. At the same time, check whether there is air or water leakage, and if there is a problem, you need to adjust it in time.

The above is the tutorial of changing the glass of the broken bridge aluminum window, I hope it will help you. During the replacement process, it is important to pay attention to safety and avoid injury.

Related Pages