The whole tutorial of sea cylinder opening.
The opening of the sea tank is an important part of the breeding of marine organisms, and the following is the whole process of opening the sea tank:
First, determine the breeding target.
The first step is to identify the target species of marine organisms to be cultured, as well as the number and scale of culture. This needs to be formulated according to the actual situation of breeding and breeding experience.
Second, design the layout of the sea tank.
According to the breeding objectives, the layout and size of the sea tank are designed. The layout of the tank needs to consider the species, number and growth stage of organisms to ensure that each organism has enough living space and a suitable living environment. At the same time, it is also necessary to consider the installation location of the filtration system, lighting system, insulation system and other equipment of the sea tank.
3. Prepare the sea tank materials.
The material of the sea cylinder needs to choose durable glass or acrylic sheet, and it is also necessary to prepare related auxiliary materials, such as glass glue, filter media, water pumps, pipes, lighting fixtures, etc.
Fourth, the construction of sea tanks.
According to the designed layout and size of the sea tank, the construction of the sea tank began. There are a few things to keep in mind during construction:
1.Install the bottom and side filter plates to ensure the media is placed correctly for easy cleaning and maintenance.
2.Install pumps and pipes to ensure that the water flows smoothly and there are no dead spots.
3.Install lighting fixtures to ensure adequate and uniform lighting to avoid shadows and chromatic aberrations.
4.Install insulation systems and temperature control equipment to ensure that the water temperature is stable and avoid the death of organisms due to temperature changes.
5.The glass glue edge is sealed to ensure that the sea tank is well sealed and prevents seawater leakage.
5. Cleaning and disinfection.
After the construction of the sea tank is completed, it needs to be cleaned and disinfected. The specific steps are as follows:
1.Wipe the surface of the tank with clean water to remove dust and impurities.
2.Soak the inside of the tank with potassium permanganate solution and disinfect it.
3.Rinse with clean water and let dry.
4.Putting the right amount of nitrifying bacteria and aquarium salts inside the tank helps to establish an ecological balance.
6. Equipment commissioning.
After the cleaning and disinfection is completed, the equipment of the sea tank needs to be debugged to ensure the normal operation of each system. The specific steps are as follows:
1.Check whether the pump is working properly, and whether the flow rate and head meet the requirements.
2.Check that the pipes are unobstructed and that there are no water leaks.
3.Check whether the lighting fixtures emit light normally and whether the brightness is appropriate.
4.Check whether the insulation system and temperature control equipment are working properly and whether the temperature is stable.
5.Inspect and debug the filtration system to ensure that the filter media is placed correctly and the filtration effect is good.
7. Add biological and auxiliary substances.
After the commissioning of the equipment is completed, the addition of marine life and auxiliary materials can begin. The specific steps are as follows:
1.According to the farming goals, the appropriate amount of marine life is purchased and put into the sea tank.
2.Add the right amount of coral bones, shells and other materials as the bottom sand to provide habitat and food for marine life**.
3.Add an appropriate amount of aquarium salts and water quality stabilizers to keep the water quality stable and healthy.
4.Add an appropriate amount of trace elements, vitamins and other substances as needed to provide necessary nutritional supplements for marine organisms.
5.Regularly check the water quality and adjust the parameters in time.