Product Introduction
py-e513Mold test chamber Mold alternating test chamber(alternating mould test chamber) is a kind of incubator, mainly for cultivating organisms and plants, setting the corresponding temperature and humidity in a confined space, so that mold grows out in about 4-6 hours, as a way to artificially accelerate the reproduction of mold, and to assess the mildew resistance and mildew degree of electrical and electronic products. It is an important detection method in the artificial three-proof climate, and it is a necessary testing equipment for storing strains and biological culture in colleges and universities, medicine, military industry, electronics, chemical industry, and biological research departments. It is used to test and judge its parameters and performance after the change of humid and hot temperature environment.
Applicable Standards:
GB10592 89 Technical conditions for high and low temperature test chamber.
GB10586 89 Technical conditions for damp heat test chamber.
gb2423.1 2001 test a high temperature test method.
gb2423.3 93 Test CA Constant Damp Heat Test Method.
gb2423.16 93 Test Moldy Test Method.
Main technical parameters:
Studio volume: 100 litres, 150 litres, 225 litres, 500 litres, 1000 litres.
Studio size: 450 450 450mm;500×600×500mm；500×600×750mm；
700×800×900mm；1000×800×1000mm；1000×1000×1000mm
Power: 38kw、4.5kw、5.3kw、7.5kw、4.5kw、5.3kw、7.5kw
Temperature and humidity operation control system:
Controller: imported programmable touch LCD Chinese dialogue microcomputer temperature and humidity integrated controller.
Dehumidification system: adopt the evaporator coil ** temperature laminar flow contact dehumidification method.
Water supply system: The humidified water supply is automatically controlled. And it can be ** surplus water. Save water and reduce consumption.
Water production system: fully enclosed air-cooled single-stage compression refrigeration method Original French "Taikang" compressor.
Performance indicators: temperature range: 20 80
Humidity range: 45 98 rh
Fluctuation Uniformity: 05℃/±2℃
Humidity deviation: 2, 3 rh
Heating time: 20 80 about 30min
Cooling time: 80 20 about 30min