How much do you know about high-rise sunrooms?Celte professionals will tell you that there are many new problems that need to be considered and solved in the design and technology of building a sunroom in high-rise buildings, such as huge winds, hail and snow, load-bearing and so on.
1. Consider self-bearing
Every tall building has its ultimate weight, and in terms of force transfer, for example, in a 30-story building, the load-bearing columns on the first floor are under the same pressure as the upper 29 floors combined. For example, if you want to build a sunroom on the 30th floor, then you need to solve the problem of self-supporting sunroom, otherwise it may be dangerous to exceed the bearing capacity of the building.
Therefore, when we choose the material of the sun room, we should choose a light and high-strength skeleton as much as possible, such as 6061 aluminum alloy, which weighs 1 3 of the steel structure, which makes the structure of the overall sun room lighter and has a minimum impact on the basic building structure system.
2. Consider wind and snow loads
Wind and snow load is an architectural term that refers to the snow pressure used to calculate the top surface of a building or structure. After a blizzard typhoon, if the high-rise sunroom is heavily covered with snow and overloaded, it may damage the structure of the sunroom and lead to potential safety hazards. Therefore, when selecting the material of the plate, it is necessary to choose a polycarbonate board that can resist impact, and the overall impact strength is 2-20 times that of tempered glass, and there is no crack even if the hail falls. In addition to strong impact resistance, it has been improved to varying degrees compared with tempered glass in terms of weather resistance, service life, easy processing and bending, and color selection.
3. Control the ratio of height and width of the sun room
The design of the high-rise sunroom is not only about aesthetics, its height-width ratio and roof slope need to be scientifically calculated to ensure its stability. Therefore, it is necessary to choose a reliable and professional manufacturer, who will generally issue a structural safety calculation book, so as to avoid the occurrence of collapse accidents after heavy snow and wind.
Concluding remarks:Due to the increase of stress, the level of equipment and decoration must be improved, and the difficulty of construction increases, therefore, the close cooperation of various professional designers is required to make the plane layout reasonable and improve the safety factor. Pay attention to the research team of Celte Sunshine Room and share more latest information about Sunshine Room!