Hach Hash GL 3700E Series Electrodeless Conductivity Probe Specifications Ordering Guide.
1. Technical indicators.
Hach Hash Gli 3700E series electrodeless conductivity probe is a high-performance conductivity measurement device with the following technical specifications:
1.Measuring range: 000 to 19990 s cm (the corresponding conductivity range can be set according to actual needs);
2.Measurement accuracy: 05% f.s.(typical);
3.Resolution: 001 μs/cm；
4.Temperature range: -40 to 75°C;
5.Pressure: 250 psi;
6.Flow rate: up to 30 gpm (approx. 113 l min);
7.Installation: Immersion or flow-through;
8.Material: PFA;
9.Cable length: The standard length is 10 meters, different lengths can be customized according to needs.
2. Ordering Guide.
1.Determine the required range: Determine the required conductivity range based on your application to ensure that the selected probe will meet your measurement needs.
2.Choose the installation method: the immersion type is suitable for the measurement of liquids in pipes and vessels, and the flow-through type is suitable for the measurement of liquids in pipelines. Choose the right installation method according to your application scenario.
3.Consider temperature and pressure: Choose the right probe model based on the temperature and pressure conditions of the liquid in your application. Make sure that the selected model has sufficient pressure and temperature resistance.
4.Cable length: Choose the right cable length based on your equipment layout and cable routing needs. If there are special needs, different lengths of cables can be customized.
5.Contact a HACH sales representative: Contact a sales representative through the HACH Hash Official** or relevant channels to provide your specific needs and configuration requirements in order to recommend the most suitable GLI 3700E series electrodeless conductivity probe model for you.
6.Place an order: After confirming that the selected model and configuration are correct, follow the ordering process provided by the sales representative to complete the order payment.
Technical Indicators. Capacity: 200-2,000,000 s cm
Wetted material: Polypropylene, PEEK, PFA Teflon, or PVDF Sample temperature:
10～200℃；The maximum flow rate is limited only by the sensor body material and mounting hardware: 3m s
Pressure Range: Up to 200 psig at 150 °CIt is limited only by the sensor body material and mounting hardware.
Accuracy: >500 s cm: 05%; 500μs/cm: ±5 μs/cm
Weight: 045kg
Please select one option for each item.
Note: The standard sensing cable length is 20 feet (6 m), to order a sensor with a non-standard length cable, please specify the total number of feet of the required length.
Ordering Guide. 