The wall casing is also called the wall casing, the waterproof casing, the wall embedded pipe, and the waterproof casing is divided into rigid waterproof casing and flexible waterproof casing. The power used for conductive use is called AC wall bushing, which can be divided into dry capacitive AC wall bushing and porcelain insulated AC wall bushing, which are referred to as silicone rubber sleeve and porcelain sleeve respectively.
fcrg1-40.5 2500A4000A Outdoor Capacitor Composite Dry Bulkhead Bushing FCRG-35KV 1250A Composite Bulkhead Casing Introduction, FCRG1-405 2500A4000A Outdoor Capacitor Composite Dry Bulkhead Sleeve FCRG-35KV 1250A Composite Bulkhead Sleeve**, FCRG1-405 2500A4000A Outdoor Capacitor Composite Dry Bulkhead Sleeve FCRG-35KV 1250A Composite Bulkhead Sleeve Reviews and **Information, Order FCRG1-405 2500A4000A Outdoor Capacitor Composite Dry Bulkhead Sleeve FCRG-35KV 1250A Composite Bulkhead Sleeve.
1. FCRG1-405 2500A4000A Outdoor Capacitor Composite Dry Bulkhead Casing FCRG-35KV 1250A Composite Bulkhead Casing Scope and Characteristics of Use.
fcrg1-40.5 2500A4000A Outdoor Capacitor Composite Dry Bulkhead Bushing FCRG-35KV 1250A Composite Bulkhead Bushing is an outdoor-indoor type, which is suitable for the power distribution device of three-phase AC system power station and substation with rated voltage of less than 10kV 35kV and frequency of 15 60Hz. The ambient temperature of the installation site is -40 40, and the altitude does not exceed 1000m. This product is suitable for horizontal installation.
2. FCRG1-405 2500A4000A Outdoor Capacitor Composite Dry Bulkhead Casing FCRG-35KV 1250A Composite Bulkhead Casing Structure and Performance.
The composite wall sleeve is composed of an epoxy fiber layer and an intermediate flange that tightly wraps the guide rod, and a silicone rubber sheath and umbrella skirt that encapsulate the epoxy glass fiber layer, and the middle flange area is uniformly treated with electric field. This series of products are produced according to Q GND-JD05-2003, and composite GB T129441—1991，gb/t12944.2-1991 and J85892-1991 "Technical Conditions for High-pressure Penetrating Porcelain Casing".