Cu-DLP (CW023A) is a high-purity copper alloy with excellent mechanical properties and electrical conductivity, which is widely used in electrical, electronic, aerospace, chemical and mechanical fields. The following is a detailed introduction to the product specifications of the CU-DLP (CW023A).
CU-DLP Cable: 01mm-1.0mm, Cu-DLP special specifications can be customized according to customer requirements;
Cu-DLP Sheet: 05mm-500mm, Cu-DLP special specifications can be customized according to customer requirements;
CU-DLP Tape: 008mm-2.5mm, Cu-DLP special specifications can be customized according to customer requirements;
Cu-DLP discharge: general specifications are in stock;
CU-DLP pipe: can be customized according to customer requirements.
CU-DLP copper sleeve: can be customized according to customer requirements.
Cu-DLP round cake: can be customized according to customer requirements.
Chemical Composition: The chemical composition of Cu-DLP (CW023A) conforms to international standards. In general, its copper content should not be less than 999%, and at the same time contains a small amount of impurity elements, such as iron (Fe), tin (sn), nickel (Ni), manganese (Mn), etc. The content of these impurity elements should be below the specified limit.
Mechanical properties: Cu-DLP (CW023A) has good mechanical properties, including tensile strength, yield strength, elongation and hardness. Generally speaking, the tensile strength should not be less than 200 MPa, the yield strength should not be less than 100 MPa, the elongation should not be less than 30%, and the hardness should be between HV 60-80.
Electrical conductivity: Cu-DLP (CW023A) has excellent electrical conductivity and is an excellent conductive material. The indicators of electrical conductivity mainly include resistivity and conductivity. In general, the resistivity should be less than 00172 ·mm2 m, the conductivity should be higher than 58% IACS (International Electrotechnical Commission Conductivity Standard).
Welding performance: CU-DLP (CW023A) has good welding performance, and can adopt a variety of welding methods, such as gas welding, arc welding, laser welding and friction welding. During the welding process, it is necessary to control the welding temperature, speed and carry out the necessary post-processing to ensure the quality of the welded joint. Common welding problems include weld cracks, porosity, inclusions, and non-fusion, so quality control is key.
Brazing performance: CU-DLP (CW023A) has good brazing performance, and silver brazing materials can be used for brazing. In the brazing process, the brazing temperature and the selection of brazing agent need to be controlled to ensure the quality of the brazing joint. Common brazing problems include incomplete brazing seams, flux residues, and insufficient strength of brazing joints, so quality control is also very important.
Cu-DLP (CW023A) is a high-purity copper alloy with excellent mechanical and electrical properties. It has good welding and brazing properties and can be widely used in electrical, electronic, aerospace, chemical and mechanical fields. When using CU-DLP (CW023A) for welding and brazing, it is necessary to pay attention to controlling the welding brazing parameters and carrying out the necessary quality control to ensure the quality of the welded joints and brazing joints.