The company launched a new type of knapsack flue-cured tobacco seedling transplanting punching machine, which is composed of a working handle, a body, an engine, a pull rod, a throttle cable, a power pipe, a drill bit, a positioner, a back and a control switchThe working handle is divided into two branches, left and right, which are respectively connected to the top of the machine body;The engine is fixed to the back, and the tie rod is attached to the engine;One end of the throttle cable is connected to the engine and the other end is connected to a work handleThe control switch is fixed on the same work handle;The lower part of the fuselage is connected with the locator, and a drill bit is installed at the bottom of the fuselage.
The utility model discloses an advantage has: (1) one person and one machine for punching operation, driven by small power, labor intensity is small, speed is fast, efficiency is high;(2) When punching, the drill bit is rotated to punch the hole, and the punching standard is high(3) The tobacco seedling transplanting punch machine is simple to operate, safe to use, easy to master, and easy to promote. It is suitable for perforation of flue-cured tobacco seedlings transplanting.
Farmland punching machine flue-cured tobacco film punching machine garden mower Botian knapsack smoke drill, diagonal smoke drill, a good assistant for tobacco farmers, labor-saving, high efficiency, greatly improve the work efficiency of tobacco farmers, reduce labor intensity.
The punching machine is composed of a working handle, a body, an engine, a tie rod, a throttle cable, a power pipe, a drill, a positioner, a back and a control switch. The working handle is divided into two branches, left and right, which are respectively connected to the top of the machine body;The engine is fixed to the back, and the tie rod is attached to the engine;The throttle cable is connected to the engine at one end of the power pipe;The other end is attached to a work handle;The control switch is fixed on the same work handle;The lower part of the fuselage is connected with the locator, and a drill bit is installed at the bottom of the fuselage.
1.The new advantages of this machine: one person and one machine for punching operation, driven by small power, low labor intensity, fast speed and high efficiency 2The punching stone is rotated by the drill bit to punch the hole, and the punching quality. Farmland punching machine flue-cured tobacco film punching machine garden mower Botian knapsack smoke drill, diagonal smoke drill, a good assistant for tobacco farmers, labor-saving, high efficiency, greatly improve the work efficiency of tobacco farmers, reduce labor intensity. 3.The punch machine is simple to operate, safe to use, easy to master, convenient and promoted. It is suitable for perforation of flue-cured tobacco seedlings transplanting.
The direct seeding cultivation method of flue-cured tobacco can save labor in seedling raising, transplanting and top dressingShorten the planting time;Save on peats and seedling trays;Eliminate the need for nursery greenhouses. It is an invention of Guizhou Provincial Tobacco Research Institute, which was published by the State Intellectual Property Office on November 21, 2012. The main points of operation of this method are as follows:
One step, one and a half months in advance, tidy up the tobacco land, open the box, apply base fertilizer along the center line of the ridge bottom, then ridge, and wait for the rain to replenish the moisture of the ridge until the soil moisture is sufficient.
In the second step, after the rain stops, drill holes and apply plant ash mixed with anti-underground pest pesticides into the holes.
The third step is to sow seeds in the holes, sowing 1 seed per hole, and then spraying the transplanting elixir into the small holes until the plant ash and coated seeds absorb water and moisten, and cover with mulch.
The fourth step, when the seeds germinate and grow to two leaves and one heart, when the tobacco seedlings are 20cm high, fertilize again, fertilizer is applied into the root holes of the tobacco plant, fill the hole with soil, until the tobacco plant grows to 50cm high, remove the film and cultivate the soil, prevent and control pests and diseases, timely top and wipe the buds, and harvest and bake in time after maturity.