16 Machinery will introduce to you the sequence and precautions for changing gear oil for roots blower
1. Preparations.
Before you start changing your gear oil, you need to make the following preparations:
1.Determine the condition of the gear oil: Check whether the oil level of the gear oil is normal, whether the color is clear, and whether there are impurities or dirt.
2.Prepare the tools: Prepare the required tools such as oil drums, strainers, funnels, rags, etc.
3.Determine the oil change time: Generally speaking, it is recommended to change the oil after 2000-3000 hours of operation of the roots blower to ensure that the gear oil is in good condition.
Second, the order of oil change.
The following is the order of changing the gear oil for roots blowers:
1.Shutdown: Stop the operation of the roots blower and ensure that the equipment is stationary.
2.Discharge: Open the drain port of the gearbox and discharge the old gear oil into the designated container.
3.Cleaning: Use a strainer to clean the impurities and dirt inside the gearbox to ensure that the inside of the gearbox is clean.
4.Add new oil: Pour new gear oil into the gearbox, taking care that the oil level should be kept at the proper level.
5.Start-up: Restart the roots blower and check whether the operating status of the equipment is normal.
6.Inspection: After the equipment has been running for a period of time, check the oil level and color of the gear oil to ensure that the gear oil is in good condition.
3. Precautions.
During the process of changing the gear oil, the following things need to be noted:
1.Do not mix old and new oil to ensure that the gear oil is in good condition.
2.When cleaning the inside of the gearbox, it is necessary to thoroughly remove impurities and dirt to avoid damage to the gears.
3.When adding new oil, pay attention to the control of the oil level, not too much or too little.
4.Before restarting the device, make sure that all tools and clutter have been cleaned to avoid damage to the device.