Traditional valves are bound to be replaced by ceramic valves.
Ceramic (raw material: non-metallic minerals) valve (function: cut-off, diversion, voltage stabilization, shunt, etc.) he has a certain position in the industrial valve, aluminum oxide ceramics his deformation is very small, and he is higher than the metal strength (strength), generally the radius of the ceramic crystal ions he is composed of is very small, and the electric price of the ions is also relatively high, and his number is also very large.
The auxiliary nozzle of the air-jet loom checks whether the side brace ring rotates flexibly, whether it is worn, whether there are flying flowers, and whether the interval between the yarn stop pin and the main drum is 05 mm, whether the air pipe is leaking, whether the centralized oil supply is leaking, whether the oil pipe is damaged or bent, whether there are flying flowers accumulated inside the control box, confirm whether the height error of the heald frame is within 2 mm, whether the exhaust pipe of the air filter is unblocked, whether there are flying flowers on the warp shaft pinion, whether there is a yarn head on the bevel gear shaft of the opening device, whether the screen hole on the oil filter is blocked, whether there is a yarn head on the warp beam for warp feeding and loosening, whether there is a yarn head on the warp beam for warp feeding, whether there is damage to the wire insulation sleeve, and whether the gap of the brake is correct. Refueling the grease nipple area, lubricating the tooth flanks of open gears and chains, and checking the heald frame and heald frame guide plate for wear.
These all determine the tensile strength and compression resistance of the ceramic valve, and of course, his hardness and elasticity are also very good. The ceramic layout design data we use to make ceramic valves is mainly used to make seals and wearing parts, of course, his wear resistance, anti-corrosion and sealing are quite good, he can be a good way to increase the life of ceramic valves, and his use is very good to reduce the number of valve maintenance.
He is also very stable (explanation: stable and stable;There is no change) and safety, the labor intensity (strength) has also been greatly reduced, and the cost (exense) has also been more economical than before.
Now the valves we use are basically metal valves, and he has a history of more than 100 years, although we have used many methods to improve him, but because of the limitations of the metal itself, it can not adapt well to high wear (a basic type of component failure) and high strength of corrosion and erosion. Slowly, he developed a short lifespan and a serious leakage problem, which had a great impact on his stability of.
Ceramics have high hardness, and the brittleness of the material is large, and it is easy to chipping and chipping during processing. Generally, the processed ceramic parts are processed by a special ceramic engraving machine, which can effectively reduce the cost and achieve high-precision machining. Xin Tenghui CNC has developed a ceramic engraving and milling machine for ceramic processing, with good protection performance and high processing accuracy. The ceramic engraving and milling machine strengthens the rigidity of the machine tool, and the vibration generated during processing can be reduced to a minimum, ensuring the accuracy while also improving the processing efficiency, and the protective performance is strengthened for the ceramic powder, which can completely eliminate the damage of the powder to the machine tool. Xin Tenghui CNC can also provide ceramic processing technology, with a skilled CNC machining, grinding team, precision parts research and development custom processing, etc.
Autumn and Winter Check-in Challenge