KBXC-5 127 Mine Travel Limit Switch Belt Conveyor Protection.
1. Overview. KBXC-5 127 Mine Travel Limit Switch is a protective device specially designed for belt conveyors, which can effectively prevent conveyor overload, overheating, wear and damage, and improve the service life and safety of the conveyor. The device is mainly composed of limit switches, sensors, control circuits, etc., and has the characteristics of simple structure, convenient installation, easy operation and stable performance.
Second, the working principle.
KBXC-5 127 mine travel limit switch detects the running status of the belt conveyor through the sensor, if an abnormal situation is found, the device will immediately start the control circuit to cut off the power supply of the conveyor to prevent accidents. The sensor is designed to be non-contact, which can monitor the operating position and speed of the conveyor in real time and transmit the detection signal to the control circuit. The control circuit processes and analyzes the received signals to determine whether protective measures are required.
3. Features and advantages.
1.High sensitivity: KBXC-5 127 mine travel limit switch adopts advanced sensors and control systems, which can monitor the operating status of the belt conveyor in real time and respond to abnormal situations in time.
2.High reliability: The sensors and control circuits of the device are designed with high reliability, which can work stably in harsh environments and effectively reduce the failure rate.
3.Easy maintenance: KBXC-5 127 mine travel limit switch has a simple structure, which is easy to install and maintain. At the same time, the device is also equipped with a self-diagnosis function, which can quickly locate the fault site and shorten the maintenance time.
4.Multiple protection functions: In addition to the basic overload protection, the device also has a variety of protection functions such as overheating, wear and blockage, which can fully guarantee the safe operation of the belt conveyor.
5.Strong compatibility: KBXC-5 127 mine travel limit switch can be used with various types of belt conveyors, with strong adaptability and a wide range of applications.
Fourth, the scope of application and how to use.
KBXC-5 127 Mine Travel Limit Switch is suitable for belt conveyor protection in various types of mining, factory and transportation industries, and has a wide range of application prospects. When using, install the limit switch in the appropriate position according to the requirements of the manual, and put it into use after the power is turned on. When the conveyor runs abnormally, the limit switch will automatically cut off the power supply to protect the conveyor and personnel.
5. Precautions and maintenance methods.
1.Regular inspection: Regularly inspect and maintain the KBXC-5 127 mine travel limit switch to ensure its normal operation. Check whether the sensor is clean, whether the fixing screws are loose, whether the wiring is secure, etc.
2.Keep it clean: Keep the limit switch clean and dry to prevent dust and debris from entering the interior and affecting its normal operation. Also, avoid splashing water or other liquids on the limit switch.
3.Avoid impact: During use, avoid hitting or knocking on the limit switch to avoid damage or reduced sensitivity.
4.Timely adjustment: If it is found that the sensitivity or position of the limit switch is not accurate, it should be adjusted or corrected in time to ensure its normal operation.
5.Regular replacement: Replace or repair the limit switch at the time interval recommended by the manufacturer to ensure its reliability and safety.
6. Technical parameters and performance evaluation.
The technical parameters of KBXC-5 127 mine travel limit switch include rated voltage, rated current, response time, action stroke, etc. In terms of performance evaluation, the following aspects can be considered: whether the protection function is comprehensive, whether the operation is easy to use, whether it has high sensitivity and reliability, whether it has a low failure rate and maintenance cost, etc. By comprehensively evaluating these factors, it can be judged whether this model of mine travel limit switch has a high level of performance and quality.
Provide a complete set of emergency protection solutions for the belt conveyor field. The products include deviation switch (two-stage deviation switch, anti-deception switch), rope switch (two-way rope switch, wire switch), slip switch (underspeed switch, speed switch, speed detector), rewind belt breakage protection device, chute blockage switch, longitudinal tear detector, material level material flow sensor, coal flow switch, conveyor belt alarm, etc.
It is widely used in steel mills, alumina refining plants, chemical plants, container handling and transportation facilities, transmission pipelines, military equipment manufacturing, nuclear facilities, cement manufacturing plants, quarries, power plants, oil and gas field drilling, oil and gas refining, pharmaceutical enterprises, pulp and paper mills, textile mills, tire manufacturing, reservoirs, design institutes, etc.
Magnetic inductive sensors.
Magnetic inductive sensors are used to detect magnetic fields and are particularly suitable for detecting the position of the piston in cylinders. Thanks to the electronic principle of operation, our magnetic field sensors can detect permanent magnets of various intensities mounted on all common cylinder pistons without error. The sensors are wear-free, short-circuit protected, robust and IP67 compliant. We can also supply products for welded areas and explosion-proof areas, as well as analog output sensors.