Does this happen to your floor heating, during the day, I feel that the temperature of the floor heating is OK, but in the second half of the night, I feel that it is not hot, or I always feel that the floor heating of my home does not have much effect, and the heating effect is not good, which is very devastating.
In fact, most of the reasons can be investigated and solved by yourselfDon't spend money to find a floor heating maintenance master to come to the door, find the reason, maybe you can do it yourself!
First-time use or long-term in-abrence
If it is a freshly installed floor heating, or it has not been used for a long time, it is relatively slow to heat up when the floor heating is turned on at this time, and it generally takes a long time (at least more than 10 hours) to reach the temperature we set, that is, because the temperature rises too slowly, the temperature has not changed much for a long time, which has caused people a feeling that the floor heating is broken.
Resolution
This kind of quality problem that does not belong to the floor heating itself, or you need to wait patiently.
Small heat dissipation area
Sometimes the floor heating at home is not hot, mainly because there are shelters on the ground, and the indoor heat dissipation area is too small, which affects the heat dissipation effect. For example, furniture in the home, carpets, etc.
Resolution
Therefore, if the floor heating is turned on and there is a large area of carpet, it is better to try to put it away and reduce the floor covering, so that the heat can be dissipated more.
There is gas in the pipes
If the main floor heating bar is hot, but the return bar is not hot, it can be determined that it is because there is gas in the pipe. There is air in the geothermal pipes, which obstructs the water circulation, so that the hot water cannot enter the circuit and cannot be circulated.
Resolution
Generally, the water separator will have an exhaust valve, which is used to exhaust gas, and the newly used and installed geothermal must be exhausted. Use the air release valve on the water separator to open the air in the pipe and deflate until the hot water is released.
The filter is clogged
If the inspection finds that there is no gas in the water pipe, but the floor heating is not hot, then you should check the filter, there is a filter on the bar of the water separator, which plays the role of filtering impurities. If the filter is blocked, which affects the normal circulation of water in the water pipe, the water flow rate decreases, the floor heating pipe has no flow, and the natural floor heating is not very hot.
Resolution
The tool wrench to open the filter, the nozzle wrench, should close all the valves of the water separator before opening, and after opening the screw cap, you can directly take out the filter screen, and then rinse with clean water or brush to clean.
The filter is clogged unevenly in the loop
If it is in the same district, the heating effect of other users is very good, but their own effect is very poor, which may be the uneven floor heating construction circuit.
Resolution
Use the small valve on the water separator to adjust the circulation of each circuit, so that it can circulate evenly and achieve a good heating effect.
The floor heating has not been cleaned for a long time
The floor heating is not hot due to untimely maintenance and inadequacy, because of long-term use, it is easy to accumulate scale or silt in the water pipe, and if it is not cleaned regularly, it will be attached to the inner wall of the pipeline, and the situation of blockage will occur, affecting the normal use of floor heating.
Resolution
Carry out regular maintenance, but don't do it yourself to clean the floor heating, and find a professional cleaning company is more reliable.
Generally, the floor heating in the home is not hot, as long as the pipes are not broken.
It's all related to these issues, so check it before using it.