Apron feeder is a kind of mechanical equipment widely used in feed processing, building materials and other industries. Its main function is to cut large pieces of material into small pieces and distribute them evenly on the conveyor belt for subsequent processing.
Before installing an apron feeder, there is some preparation that needs to be done. First of all, you need to determine where and how the equipment will be installed to ensure that the equipment can function properly. Secondly, the installation site needs to be cleaned to ensure that the equipment installation area is clean and dry. It is necessary to check whether the parts of the equipment are complete, and carry out preliminary assembly in accordance with the requirements of the instruction manual.
The specific steps to install the apron feeder are as follows:
1.Place the device smoothly on a pre-prepared foundation.
2.Install the drive and reducer.
3.Install the motor and coupling, and connect the power cord.
4.Install pulleys and belts, and adjust belt tension.
5.Install the cutting blade and stator plate.
6.Carry out a test run and fine-tune according to the actual situation.
It should be noted that during the installation process, it is necessary to strictly follow the operating procedures to avoid equipment damage or personal injury caused by improper operation. At the same time, regular maintenance and maintenance should also be paid attention to in the operation of the equipment to ensure the long-term stable operation of the equipment.