The water heater is one of the essential electrical appliances at home, with a water heater, you can also take a hot shower in winter, the water is not cold, and a water heater can be connected to the kitchen faucet at home, the faucet in the bathroom,When you turn it on, there is hot water, and it is very comfortable to use.
In order for the water heater to be able to continuously supply weak waterMany homes leave their water heaters on 24 hours a dayBut is it the right thing to do?Will the water heater be turned on all year round will it affect its service life, and what hidden dangers will it bring to us?
Should the electric water heater be turned on 24 hours a day?
Some people will turn on the water heater at home 24 hours a day, so that the hot water is more convenientEvery time you turn on the faucet, warm water flows out, but some people think that the water heater is too power-hungry for 24 hoursSo turn on when you're in use and turn off when you're not in use.
In fact, most of the water heaters we use are first-class and second-class energy efficient water heaters, and they usually can't use too much electricity for a day, but it is undeniable that if the water heater is turned on for a long time, it will indeed cause certain hidden dangersFor example, the heating rod inside the water heater will work all the time, as if it is boiling water when it is hot.
The water quality problem will also affect the working efficiency of the heating rod, and some scale will form after a long timeSo if the water heater is powered all the time, then wait until the water temperature drops below the set temperature, and the heating rod will start workingThe cycle will definitely consume electricity, so if the water heater used at home is turned on 24 hours a day, your home's electricity bill will be high.
Water frequency and seasonality are key
So do we need to turn it on when we don't need it, and turn it off when we don't need it?It's winter, and hot water is used more frequently, so if you turn it on when you use it, you will have to wait a long time for the water to heat up, so how to do it depends on the frequency and seasonality of your water。If you want to save electricity, you can also turn on the water heater half an hour in advance.
But one thing not to be overlooked is to clean the water heater frequently if there is limescale buildup on the heating rod insideThen the more electricity consumption affects the water quality, you will find that the shower at home is often easy to block, and after taking a shower, you will feel very itchy all over your body, in fact, this is all caused by the water quality.
Take out the heating rod from the water heater and clean it, or replace it with a new magnesium rodTo clean the scale on the heating rod, you can use citric acid descaler, which will not hurt the magnesium rod and the effect of removing limescale is particularly good
Just put the citric acid descaler in warm water, dissolve it safely, and then soak the microrod in itSoak for 10 minutes to 20 minutes and the limescale on it will come off automatically.
After the magnesium rod is cleaned, the water quality inside the water heater can be ensured to be unpolluted, and the water is safer and more assuredIn addition to cleaning the magnesium rod frequently, it is best to replace the shower at home with a [pressurized shower].
The old shower used to be used for a period of time will be blocked by limescale, and the water flow will be intermittently replaced with a pressurized shower. Its internal filter element can filter the impurities in the water, which is more convenient and safe.
Moreover, it has 5 levels of adjustment of the one-key water stop mode, 5 different water outlets, which can meet different water needs, it is to increase the number of water outlets, and reduce the diameter of the water outlet to achieve the effect of pressurization.
And after experimental data proved, the use of pressurized showers can save 30% of water consumption than ordinary showers, the pressurized showers and ordinary showers put together comparison, the effect is clear at a glance, you see this pressurized shower ** cheap, but it is comparable to many foreign brands of showers, with it makes your water more convenient and safe.
You can disassemble the old-fashioned shower at home and install a pressurized shower, each way of dispensing water is very strong, and it is like a massage on the body, which can make you feel the strong water flow washing.
In fact, he was not able to change the water pressure, but by adding many outlets, and reducing the diameter of each outlet to 01 mm to achieve a pressurized effect, so that every time you turn on the shower, you can feel the water flow 10 minutes strong, especially for users living on high floors.
The water pressure at home is unstable, the water flow is intermittent or the scale blocks the water outlet, resulting in a slower water outlet, and there are many water outlets that no longer come out.
The captain concluded:
Is it necessary to have the water heater at home on 24 hours a day, it is recommended that everyone: if you want to save electricity, it is best to turn it on when you use it, and don't forget to clean the heating rod inside, that is, the magnesium rod, if the magnesium rod has scale, it will consume more electricity, and the water quality is not good.
Warm Winter Good Thing Award