The indispensable part of the maintenance of the forklift battery is to regularly replenish the battery with distilled water and deionized water. In the process of charging, discharging and storage, the battery will evaporate a part of the water due to the use environment and internal high temperature reaction. If you do not add water to the battery in time, the battery will be in a state of water shortage for a long time, which will affect the service life of the battery. So, how should we add water to a forklift battery?When to add?In what way to add?How much is appropriate?Let's take a closer look at it!
In the process of using the battery, it is necessary to regularly check the water shortage status of the battery according to the use environment and temperature, and replenish the water for the battery in time.
If the battery level is lower than the minimum liquid level, it is necessary to add deionized water or distilled water to the highest and lowest levels, and it is strictly forbidden to add battery stock solution or tap water. The battery stock solution will dilute or increase the original specific gravity of the electrolyte, causing the battery to deteriorate. Tap water contains too many impurities, which will cause the battery to react thin, and long-term addition of tap water may cause a short circuit and damage the battery.
Forklift battery water filling time
It is not recommended to add water during the use of the battery, water should be added at the end of the charging period (one hour before the end of charging), the bubbles inside the battery are churning during charging, and the reaction is violent.
The principle of adding water to the forklift battery
It is strictly forbidden to add too much water to exceed the maximum liquid level. If too much water is added, the forklift battery may overflow when charging and moving, resulting in a decrease in the overall specific gravity of the battery, a decrease in performance, water and corrosion in the tank, and even a short circuit in the battery.
Before using the forklift battery, the user should carefully read the battery manual and the warning label on the battery box, and try to add water to the forklift battery in accordance with this standard, which is helpful for efficient use and correct maintenance of the battery and prolongs the service life of the battery.
Forklift battery water addition method
Automatic battery systemIt is a patented product independently developed by Lianhong, which is an automatic water replenishment equipment developed for rich liquid batteries, which can fully replace the manual water replenishment maintenance operation of the battery, monitor the water shortage status of the battery in real time, automatically replenish water, and self-stop when full of water, and the electrolyte level can be kept in a healthy state throughout the whole process after the equipment is installed, so as to ensure the stability and balance of the electrolyte characteristics of the battery, optimize the efficiency of the battery equipment, and prolong the service life of the battery.
Lianhong forklift automatic water replenishment systemIt retains the advantages of high stability, strong environmental adaptability and low performance of ordinary lead-acid batteries, and at the same time obtains a stable service life and great maintenance convenience at a very low cost, with a very considerable cost performance.
The battery is very important for electric forklifts, and its normal operation is necessary for the efficient operation of forklifts. Filling a battery with water is not as simple as opening the battery refill cap and filling it with water. What kind of water should be added, when to add water, and when to add water are all things that need to be mastered. Only by replenishing water correctly and in time can we ensure the good operation of the battery and effectively extend the service life of the battery.