Honeycomb aluminum panel is a kind of metal composite decoration material favored by more and more curtain wall designers and owners because of its excellent properties such as light weight, high strength, corrosion resistance and sound and heat insulation. So, where should the honeycomb aluminum plate be installed?It is suitable for installation in parts such as building curtain walls and ceilings.
First, the main installation site.
Honeycomb aluminum panels are mainly installed in the following parts:
1.Building curtain wall: honeycomb aluminum panel can replace the traditional aluminum veneer curtain wall, glass curtain wall and stone curtain wall, making the building appearance more modern, but also has the advantages of environmental protection and energy saving.
2.Ceiling: Due to the light weight of honeycomb aluminum panels, it is very suitable for the decoration of ceilings. Its acoustic and thermal insulation properties can significantly increase indoor comfort.
3.Partition wall: Honeycomb aluminum panels can also be used for the decoration of indoor partition walls, which can effectively insulate sound and help to beautify the indoor environment.
2. Installation steps and sequence
The installation steps of honeycomb aluminum plate are mainly divided into the following steps:
1.Measurement and calculation: First of all, it is necessary to accurately measure the area that needs to be covered, and calculate the number of honeycomb aluminum panels that need to be purchased according to the actual situation.
2.Preparation: Clean and keep the surface of the installation area flat, and at the same time, the installer needs to wear safety protective equipment correctly.
3.Cutting honeycomb aluminum plate: Use professional equipment to cut honeycomb aluminum plate according to the actual required size.
4.Glue: Apply glue to the installation area, and stick the cut honeycomb aluminum plate on the glue and fix it with wooden strips.
5.Edge banding treatment: According to the actual needs, the honeycomb aluminum plate is edgebanded.
6.Inspection and cleaning: Check whether the installed honeycomb aluminum plate is tightly bonded, if there is any problem, it should be dealt with in time, and the installation area should be cleaned up.
3. For the installation of honeycomb aluminum plates, there are some suggestions to pay attention to:
1.Installation tools: Use a special metal cutting machine to cut the panels, keep the cutting lines flat and free of jaggedness, and minimize noise and dust generation. For stationary work, special punches and rivet guns are required.
2.Installation process: Before the installation of honeycomb aluminum panels, the installation of the curtain wall structural frame should be carried out to ensure that the frame is firm and reliable, and can bear the weight of the decorative panels.
3.Connection: Hidden connections are mostly used between honeycomb aluminum panels to ensure the aesthetics of the surface. There is a certain gap between the plates to avoid the problem of thermal expansion and contraction caused by temperature changes.
4.Waterproof treatment: During installation, in order to prevent the intrusion of rain or moisture, it is necessary to do a waterproof treatment at the installation interface of the honeycomb aluminum plate, such as applying waterproof glue or installing waterproof rubber pads.
5.Maintenance: Although the honeycomb aluminum plate is corrosion-resistant, it also needs regular cleaning and maintenance in order to ensure its gloss and service life. If used in places that are susceptible to contamination, such as exterior walls, more frequent cleaning is required.
The above is the professional knowledge and advice for the installation of honeycomb aluminum panels.